Grotti 2.5.1: Druckbericht, Statistik, Spulenakte und Protokoll-Fixes.

Kacheln zeigen Moonraker-Thumbnails; Toolpath-Thinning behält ganze Schichten; Nicht-ASCII-Namen vermeiden 10115 beim Senden.

CHANGELOG.md

@@ -4,6 +4,51 @@ Alle Änderungen an Grotti. Format nach [Keep a Changelog](https://keepachangelo
 
 ## [Unreleased]
 
+## [2.5.1] – 2026-10-17
+
+### Neu
+
+- Cockpit-Steuerung: ACE-Trockner starten/stoppen (Temp, Dauer), nur wenn ein ACE hängt.
+- Cockpit-Steuerung: bestückte ACE-Plätze mit Sorte und Farbe aus Grotti an den Drucker schreiben.
+- Wand-Kacheln zeigen das Druck-Vorschaubild (Moonraker-Thumbnail) in der Job-Zeile.
+- **Druckbericht** `/protokoll/<id>`: Soll/Ist-Gramm, Spulenanteile, Temperaturverlauf, Ereignisse, Charge.
+- **Statistik** `/statistik`: Auslastung, Erfolg, Verbrauch, Ausschuss, Schätztreue; CSV-Export.
+- Spulenakte unter Material: verdruckte Gramm, Ausschuss, Leer-in aus dem Wochenverbrauch.
+- Etiketten pro Druck oder Objekt (`D-YYYYMMDD-nnnn`), QR auf den Bericht; Scan von `D-…` öffnet den Bericht.
+- Spulenabzug nach Ist (`filament_used`); Abbruch nur anteilig; Mehrfarb-Anteile als Schätzwert; Rest darf ins Minus.
+- Rollenwechsel während Druck/Pause (Einlegen) teilt den Verbrauch in Abschnitte.
+
+### Geändert
+
+- Statistik: Zeitraum per Knopf (Tag, Woche, Monat, Gestern, Letzte Woche, Letzter Monat, Alles); Bis-Datum zählt inklusiv; CSV übernimmt denselben Filter.
+- Druck-Charge `D-…` wieder während des Laufs (Protokoll, Wand-Etikett, Bericht); Adoption übernimmt die Nummer auf den History-Job. Ausschuss: gedruckte Bögen verwerfen, Charge bleibt.
+- Dateien → ACE-Zuordnung: Platz-Dropdown zeigt bei bekannter Spule Material, Farbe, Name und Restgramm.
+
+### Behoben
+
+- Spulenakte blieb leer: Abzug schrieb oft kein `run_spools` (hängende History-Läufe, Abzug vor Akte-Tabelle); Nachzug ohne erneuten Rest-Abzug, Abzug schreibt `run_spools` vor `deducted`.
+- Protokoll: keine Doppel-„druckt“-Zeilen mehr (Live + History); Watcher hängt am History-Job, sobald Moonraker ihn kennt; Liste blendet überzählige Live-Zeilen aus.
+- Platte geräumt: `needs_clear` nach Watcher-Ende und History-Sync (nur wenn kein Live-Druck); neuer Druckstart bricht alte Live-Läufe ab.
+- Druck-Etikett: Material schon während des Laufs (Send/ACE/Spule); QR bleibt im 70‑mm-Bogen.
+- Druckstart: Dateien mit altem `stored_path` (z. B. nach Umzug von `3DP/…/Uebersicht` nach Grotti) werden unter `data/eingang/<name>` wiedergefunden statt „liegt nicht mehr auf der Platte“.
+- Wand/Sidebar: Dateiname springt nicht mehr alle paar Sekunden, wenn Moonraker kurz keinen Namen liefert; 3D-Pfad-Caption flackert nicht mehr mit „wird gelesen …“.
+- Dateien: Hinweis zu fehlendem ACE-Trailer nur noch bei Mehrfarb (nicht als Warnung bei Monoteilen).
+- 3D-Pfad wirkte gesprenkelt: Ausdünnen behält ganze Schichten dicht (statt Stichproben entlang der Bahn); keine Parallel-Offsets.
+- Toolpath-API mit `Cache-Control: no-store`, damit der Browser keinen alten Pfad behält.
+- Senden: Dateinamen mit Nicht-ASCII (z. B. CJK) werden für Moonraker/Rinkhals auf ASCII normalisiert — sonst Fehler 10115 „gcode … not found“.
+
+## [2.2.2] – 2026-10-15
+
+### Behoben
+
+- 3D-Pfad: bei großen G-codes zerbrach das Ausdünnen die Segment-Paare — Viewer zeigte nur Objekt-Umrisse, keinen Druckfortschritt (grün/grau).
+
+## [2.2.1] – 2026-10-15
+
+### Geändert
+
+- Anleitungen mit relativen Bild- und Kapitelpfaden (`../web/static/doku/…`, `Anleitung-*.md`), damit Screenshots und Querverweise auch auf Git lesbar sind; die App schreibt sie beim Rendern auf `/static/…` bzw. `/doku/…` um.
+
 ## [2.2.0] – 2026-10-15
 
 ### Neu

docs/Anleitung-ACE.md

@@ -1,8 +1,8 @@
 # ACE und Spulen
 
-Stand **15.10.2026**. Mehrfarb-Drucke brauchen vor dem Start eine Zuordnung Datei-Farbe → ACE-Platz und eine passende Spule am Drucker.
+Stand **17.10.2026**. Mehrfarb-Drucke brauchen vor dem Start eine Zuordnung Datei-Farbe → ACE-Platz und eine passende Spule am Drucker.
 
-![ACE-Zuordnung beim Senden](/static/doku/ace-zuordnung.png)
+![ACE-Zuordnung beim Senden](../web/static/doku/ace-zuordnung.png)
 
 ## Spule einlegen
 
@@ -12,13 +12,14 @@ Stand **15.10.2026**. Mehrfarb-Drucke brauchen vor dem Start eine Zuordnung Date
 
 Es gibt **kein freies Spulen-Dropdown** beim Start: Grotti nimmt die Rolle(n), die am Ziel-Drucker liegen. Material-Mismatch oder zu wenig Rest → Warnung vor dem Start.
 
-Etiketten mit QR: [Material und mehr](Anleitung-Material).
+Etiketten mit QR: [Material und mehr](Anleitung-Material.md).
 
 ## ACE-Map beim Senden
 
 Unter **Dateien → Optionen → ACE-Zuordnung**:
 
 - Jede Farbe aus der Datei (`paint_index`) einem **ACE-Platz** zuordnen
+- Liegt unter Material eine Spule auf dem Platz, zeigt die Liste Name, Farbe und Restgramm mit
 - Ohne passende Map schreibt der Drucker oft **„cannot parse the file“** und startet nicht
 - Grotti legt die Sidecar `*.gcode.acm` an und schickt sie mit
 
@@ -35,5 +36,5 @@ Externe Spule / keine ACE-Slots: keine `.acm` nötig.
 
 ## Weiter
 
-- [Dateien senden](Anleitung-Dateien)
+- [Dateien senden](Anleitung-Dateien.md)
-- [Material](Anleitung-Material)
+- [Material](Anleitung-Material.md)

docs/Anleitung-Dateien.md

@@ -2,7 +2,7 @@
 
 Stand **15.10.2026**. Seite `/dateien` — Bibliothek links, Senden rechts.
 
-![Dateien: Bibliothek und Senden](/static/doku/dateien-flow.png)
+![Dateien: Bibliothek und Senden](../web/static/doku/dateien-flow.png)
 
 ## Bibliothek
 
@@ -31,7 +31,7 @@ Unter Optionen u. a.:
 
 - **Bettnetz / Auto-Level** beim MQTT-Start (Anycubic)
 - Maschinen-Override, Projekt zuweisen
-- **ACE-Zuordnung** — siehe [ACE und Spulen](Anleitung-ACE)
+- **ACE-Zuordnung** — siehe [ACE und Spulen](Anleitung-ACE.md)
 
 ## Warum es dauert
 
@@ -39,11 +39,11 @@ Große Dateien brauchen oft **eine Minute**. In der Sidebar unter **Senden** sie
 
 ## Nach dem Start
 
-- Fortschritt auf der [Wand](Anleitung-Wand) und in der Sidebar **Läuft jetzt**
+- Fortschritt auf der [Wand](Anleitung-Wand.md) und in der Sidebar **Läuft jetzt**
-- Bei „Wenn frei“: Eintrag unter [Warteschlange](Anleitung-Warteschlange)
+- Bei „Wenn frei“: Eintrag unter [Warteschlange](Anleitung-Warteschlange.md)
 - Später unter **Protokoll** mit **Nochmal** (inkl. gespeicherter ACE-Map)
 
 ## Weiter
 
-- [ACE und Spulen](Anleitung-ACE)
+- [ACE und Spulen](Anleitung-ACE.md)
-- [Warteschlange](Anleitung-Warteschlange)
+- [Warteschlange](Anleitung-Warteschlange.md)

docs/Anleitung-Einrichtung.md

@@ -34,7 +34,7 @@ copy config.example.json config.json
 | `energy`, `telegram`, `alerts` | Kosten im Protokoll und Telegram — später auch unter Einstellungen. |
 | `secret_key` | Für Login-Sessions. Beim ersten Start wird ein Wert erzeugt, wenn leer. |
 
-Drucker beim ersten Start über `drucker.json` (Seed). Danach pflegt man sie unter [Einstellungen](Anleitung-Einstellungen).
+Drucker beim ersten Start über `drucker.json` (Seed). Danach pflegt man sie unter [Einstellungen](Anleitung-Einstellungen.md).
 
 ```json
 [{ "name": "Kobra 3 da26", "host": "10.10.1.60" }]
@@ -50,7 +50,7 @@ Die Familie (Kobra 3 oder S1) liest Grotti aus dem Namen.
 
 Dann <http://127.0.0.1:8770/> öffnen. Beim ersten Start legst du den Admin-Benutzer an. Nach Code-Änderungen an Python oft neu starten.
 
-![Druckerwand nach dem Start](/static/doku/wand-uebersicht.png)
+![Druckerwand nach dem Start](../web/static/doku/wand-uebersicht.png)
 
 ## Sicherheit
 
@@ -61,6 +61,6 @@ Dann <http://127.0.0.1:8770/> öffnen. Beim ersten Start legst du den Admin-Benu
 
 ## Weiter
 
-- [Oberfläche](Anleitung-Oberflaeche) — Navigation und Sidebar
+- [Oberfläche](Anleitung-Oberflaeche.md) — Navigation und Sidebar
-- [Dateien senden](Anleitung-Dateien) — erster Druck
+- [Dateien senden](Anleitung-Dateien.md) — erster Druck
 - Ausführlich im `README.md` im Projektordner

docs/Anleitung-Einstellungen.md

@@ -2,11 +2,11 @@
 
 Stand **15.10.2026**. Seite `/einstellungen` — Drucker, Automatik, Anzeige, Telegram, Energie.
 
-![Einstellungen: Drucker](/static/doku/einstellungen-drucker.png)
+![Einstellungen: Drucker](../web/static/doku/einstellungen-drucker.png)
 
 ## Dieser Browser
 
-- **Desktop** oder **Regal (Touch)** — nur lokal im Browser, siehe [Oberfläche](Anleitung-Oberflaeche).
+- **Desktop** oder **Regal (Touch)** — nur lokal im Browser, siehe [Oberfläche](Anleitung-Oberflaeche.md).
 
 ## Automatik
 
@@ -40,5 +40,5 @@ Watt und Strompreis für die Kosten im **Protokoll**. Optional Trockner/Ausschus
 
 ## Weiter
 
-- [Einrichtung](Anleitung-Einrichtung) (Config-Datei)
+- [Einrichtung](Anleitung-Einrichtung.md) (Config-Datei)
-- [Störungen](Anleitung-Stoerungen)
+- [Störungen](Anleitung-Stoerungen.md)

docs/Anleitung-Material.md

@@ -1,28 +1,36 @@
 # Material und mehr
 
-Stand **15.10.2026**. Spulen, Etiketten, Projekte, Protokoll, Kameras, Aktivität und Ideen.
+Stand **17.10.2026**. Spulen, Etiketten, Projekte, Protokoll, Statistik, Kameras, Aktivität und Ideen.
 
-![Material: Spulen](/static/doku/material-spule.png)
+![Material: Spulen](../web/static/doku/material-spule.png)
 
 ## Material
 
 Zwei Reiter: **Spulen** und **Sorten**.
 
-**Spulen:** Filter Alle / Am Drucker / Regal / Wenig Rest. Formular bei Auswahl oder „Neue Spule“. Ort = Drucker · ACE/extern oder Regal. Scan-Feld im Seitenkopf (QR vom Etikett).
+**Spulen:** Filter Alle / Am Drucker / Regal / Wenig Rest. Formular bei Auswahl oder „Neue Spule“. Ort = Drucker · ACE/extern oder Regal. Scan-Feld im Seitenkopf (QR vom Etikett). Unter der ausgewählten Spule die **Akte**: verdruckte Gramm, Ausschuss, Leer-in.
 
 **Sorten:** Profile (Dichte, Preis, Maschinen). „Spule damit anlegen“ wechselt zum Spulen-Reiter.
 
 ### Etikett und QR
 
-Pro Spule ein Etikett mit Chargennummer und QR. Der Code öffnet Material mit der Spule vorausgewählt. Dafür in den Einstellungen ggf. **FQDN** setzen (öffentliche URL), sonst gilt der Host aus dem Request.
+Pro Spule ein Etikett mit Chargennummer `S-…` und QR. Der Code öffnet Material mit der Spule vorausgewählt. Dafür in den Einstellungen ggf. **FQDN** setzen (öffentliche URL), sonst gilt der Host aus dem Request.
+
+Druck-Etiketten (`D-…`) kommen vom Druckbericht: ein Etikett für den ganzen Lauf oder je Objekt. Scan von `D-…` öffnet den Bericht.
 
 ## Projekte
 
 Unter **Projekte** Aufträge mit Notiz und Kalkulation. Dateien lassen sich einem Projekt zuweisen (Bibliothek / Senden).
 
-## Protokoll
+## Protokoll und Statistik
 
-Abgeschlossene Läufe: Dauer, Gramm, Kosten, Urteil. **Nochmal** startet denselben Job inkl. gespeicherter ACE-Map und Bettnetz-Option.
+Abgeschlossene Läufe: Dauer, Ist-Gramm, Kosten, Urteil. Zeile öffnet den **Druckbericht** (Soll/Ist, Spulen, Temperaturverlauf, Charge). **Nochmal** startet denselben Job inkl. gespeicherter ACE-Map und Bettnetz-Option.
+
+Unter **Statistik** Auslastung, Erfolg, Verbrauch und CSV-Export. Zeitraum per Knopf (Tag, Woche, Monat, Gestern, Letzte Woche, Letzter Monat) oder eigene Von/Bis-Daten.
+
+Druck-Etiketten (`D-…`) schon während des Drucks: an der Wand **Etikett**, im Druckbericht **Etikett Druck** / **Etiketten Objekte**. Auf dem Bogen steht das Zielgewicht. Bei Ausschuss die gedruckten Bögen wegwerfen; die Charge bleibt im Protokoll.
+
+Abzug nach dem Druck nimmt das Ist aus `filament_used` (Abbruch nur anteilig). Mehrfarb-Anteile sind als Schätzwert gekennzeichnet. Restgramm darf unter 0 gehen.
 
 ## Kameras
 
@@ -38,5 +46,5 @@ Zeitstrahl: Starts, Schritte, Fertig, Fehler, Abbrüche, offline. Filter nach Dr
 
 ## Weiter
 
-- [ACE und Spulen](Anleitung-ACE)
+- [ACE und Spulen](Anleitung-ACE.md)
-- [Einstellungen](Anleitung-Einstellungen)
+- [Einstellungen](Anleitung-Einstellungen.md)

docs/Anleitung-Oberflaeche.md

@@ -4,11 +4,11 @@ Stand **15.10.2026**. Wie die App aufgebaut ist — Menü, Live-Leiste, Desktop
 
 ## Navigation
 
-Links (Desktop): **Drucker**, **Dateien**, **Kameras**, **Aktivität**, **Warteschlange**, **Protokoll**, **Material**, **Projekte**. Darunter **Einstellungen**, **Ideen**, **Doku**. Fuß: Version (öffnet die Doku).
+Links (Desktop): **Drucker**, **Dateien**, **Kameras**, **Aktivität**, **Warteschlange**, **Protokoll**, **Statistik**, **Material**, **Projekte**. Darunter **Einstellungen**, **Ideen**, **Doku**. Fuß: Version (öffnet die Doku).
 
 Unter ca. 760 px: untere Leiste mit den wichtigsten Seiten. Das Seitenmenü lässt sich zur Icon-Rail einklappen.
 
-![Seitenleiste mit Live-Boxen](/static/doku/sidebar-live.png)
+![Seitenleiste mit Live-Boxen](../web/static/doku/sidebar-live.png)
 
 ## Live-Leiste
 
@@ -33,5 +33,5 @@ Shortcut in der URL: `?shelf=1` bzw. `?shelf=0`. Nur dieser Browser (`localStora
 
 ## Weiter
 
-- [Druckerwand](Anleitung-Wand)
+- [Druckerwand](Anleitung-Wand.md)
-- [Dateien senden](Anleitung-Dateien)
+- [Dateien senden](Anleitung-Dateien.md)

docs/Anleitung-Stoerungen.md

@@ -31,7 +31,7 @@ Was tun: Abbruch über Grotti (nicht nur am Display), auf der Wand den Task-Hinw
 
 ## ACE / „cannot parse“
 
-ACE-Zuordnung unter Dateien → Optionen prüfen. Spulen am richtigen Platz. Siehe [ACE und Spulen](Anleitung-ACE).
+ACE-Zuordnung unter Dateien → Optionen prüfen. Spulen am richtigen Platz. Siehe [ACE und Spulen](Anleitung-ACE.md).
 
 ## Offline
 
@@ -45,6 +45,10 @@ Im Cockpit (nur bei aktivem Druck/Heizen). Danach oft **Strom aus und wieder an*
 
 Oft noch Verarbeitung auf dem Drucker. In der Sidebar unter **Senden** den Fortschritt beobachten. Nach einem Grotti-Update den Dienst einmal neu starten.
 
+## „gcode … not found“ (10115)
+
+Oft Dateinamen mit Nicht-ASCII-Zeichen (z. B. Chinesisch). Grotti normalisiert den Namen beim Senden auf ASCII. Nochmal senden; in der Bibliothek darf der Originalname bleiben.
+
 ## Wo nachschauen
 
 - Sidebar: Alerts, Läuft, Wartet, Senden
@@ -52,5 +56,5 @@ Oft noch Verarbeitung auf dem Drucker. In der Sidebar unter **Senden** den Forts
 
 ## Weiter
 
-- [Druckerwand](Anleitung-Wand)
+- [Druckerwand](Anleitung-Wand.md)
-- [Warteschlange](Anleitung-Warteschlange)
+- [Warteschlange](Anleitung-Warteschlange.md)

docs/Anleitung-Wand.md

@@ -2,7 +2,7 @@
 
 Stand **15.10.2026**. Startseite `/` — eine Karte je Drucker. Klick öffnet das Cockpit.
 
-![Druckerwand](/static/doku/wand-uebersicht.png)
+![Druckerwand](../web/static/doku/wand-uebersicht.png)
 
 ## Karte
 
@@ -30,13 +30,13 @@ Während eines Abräum-Ablaufs blendet Grotti „Platte geräumt“ aus — der
 
 URL mit Hash: `/#<host>` (z. B. nach Klick auf die Karte).
 
-![Cockpit eines Druckers](/static/doku/cockpit.png)
+![Cockpit eines Druckers](../web/static/doku/cockpit.png)
 
 Inhalt:
 
 - **Kamera** — nur wenn eine Webcam erreichbar ist; sonst bleibt der Platz weg
 - Status, Temps inkl. Bauraum wo verfügbar, Lüfter
-- **Steuerung:** Zieltemperaturen, Speed, Flow, Fan — fest vorgegebene Befehle, keine freie Konsole
+- **Steuerung:** Zieltemperaturen, Speed, Flow, Fan — fest vorgegebene Befehle, keine freie Konsole. Mit ACE zusätzlich Trockner (Temp, Dauer, Start/Stopp) und pro bestücktem Platz **an den Drucker** (Sorte und Farbe aus der Grotti-Spule)
 - **E-Stop** nur bei printing/paused/heating (Zwei-Klick). Danach oft Strom aus/an
 - **3D-Pfad** der laufenden oder gewählten Datei; Objekte ausschließen (mit Bestätigung)
 - **Bettnetz**-Heatmap, wenn vorhanden
@@ -45,10 +45,10 @@ Inhalt:
 
 - Gesperrte Drucker (Einstellungen) starten keine neuen „wenn frei“-Jobs.
 - Live-Daten kommen mit wenigen Sekunden Verzögerung.
-- Ein Task-Hinweis auf der Karte zeigt, wenn auf dem Drucker noch ein alter Auftrag hängt — siehe [Störungen](Anleitung-Stoerungen).
+- Ein Task-Hinweis auf der Karte zeigt, wenn auf dem Drucker noch ein alter Auftrag hängt — siehe [Störungen](Anleitung-Stoerungen.md).
 
 ## Weiter
 
-- [Dateien senden](Anleitung-Dateien)
+- [Dateien senden](Anleitung-Dateien.md)
-- [Warteschlange und Ablauf](Anleitung-Warteschlange)
+- [Warteschlange und Ablauf](Anleitung-Warteschlange.md)
-- [Störungen](Anleitung-Stoerungen)
+- [Störungen](Anleitung-Stoerungen.md)

docs/Anleitung-Warteschlange.md

@@ -2,7 +2,7 @@
 
 Stand **15.10.2026**. Aufträge „wenn frei“, Priorität, und der Kobra-3-Ablauf (drucken → abkühlen → schieben → tasten).
 
-![Warteschlange](/static/doku/warteschlange.png)
+![Warteschlange](../web/static/doku/warteschlange.png)
 
 ## Seite Warteschlange
 
@@ -48,5 +48,5 @@ Aktueller Schritt: auf der Druckerkarte und in der Sidebar. Abbrechen an beiden
 
 ## Weiter
 
-- [Druckerwand](Anleitung-Wand)
+- [Druckerwand](Anleitung-Wand.md)
-- [Störungen](Anleitung-Stoerungen)
+- [Störungen](Anleitung-Stoerungen.md)

docs/internal/Chargen-Etiketten-Viewer.md

@@ -1,6 +1,6 @@
 # Chargen, Etiketten und 3D-Viewer
 
-Stand 14.10.2026.
+Stand 17.10.2026.
 
 ## Spulen-Chargen
 
@@ -10,9 +10,15 @@ Scannen: auf Material den Code tippen oder per USB-Handscanner (Tastatur + Enter
 
 Etikett: `/etikett/<id>`, Druck über den Browser. QR per lokalem `qrcode.min.js` (`web/static/`). Basis-URL für den QR kommt aus Einstellungen → **FQDN** (`config.json` Key `fqdn`); leer = Host der aktuellen Anfrage. Beispiel: `https://grotti.example.de/material?spool=12`.
 
+## Druck-Chargen
+
+`D-YYYYMMDD-0001` vergibt der Watcher am aktiven Lauf (History-Job, sonst Live). `adopt_live_run` übernimmt die Nummer. Objekt-Etiketten `D-…-01` sobald Objektnamen da sind.
+
+Druck über `/etikett/lauf/<id>?mode=druck|objekt`. Auf dem Bogen: Charge, **Zielgewicht** (Slicer-Soll), Drucker, Material (Abzug oder Send/ACE/Lauf-Spule), QR 20 mm im 70‑mm-Bogen. Wand: Knopf **Etikett** bei Druck/Pause. Urteil Ausschuss ändert die Charge nicht — gedruckte Bögen verwerfen.
+
 ## 3D-Pfad
 
-`GET /api/v1/dateien/<id>/pfad` liefert einen gedünnten Toolpath (bis ca. 120 000 Punkte, plus `layer_breaks`, Cache-`version` 5) aus dem lokalen G-code. Die Dateien-Seite und das Cockpit zeichnen ihn mit Three.js.
+`GET /api/v1/dateien/<id>/pfad` liefert einen gedünnten Toolpath (bis ca. 220 000 Punkte, plus `layer_breaks`, Cache-`version` 8) aus dem lokalen G-code. Thinning behält ganze Z-Höhen dicht und lässt nur ganze Schichten weg (sonst gesprenkelte Wände). Die Dateien-Seite und das Cockpit zeichnen ihn mit Three.js.
 
 Darstellung: nur Extrusionswege. Preview = orange. Live: gedruckt leicht verdickt grün, offen grau; Schnitt nach `progress`. Parser akzeptiert `E.39`/`Z.6`. Bett: Gitter 10 mm, mm-Sprites, Legende.
 

docs/internal/Druckbericht-Statistik.md

@@ -0,0 +1,26 @@
+# Druckbericht und Statistik
+
+Stand **17.10.2026**.
+
+## Tabellen
+
+- `runs`: zusätzlich `weight_planned_g`, `weight_used_g`, `weight_source`, `filament_used_mm`/`filament_total_mm`, `progress_last`, `estimated_s`, `chargen_nr`, `message`, `objects`
+- `run_spools`: Abzug je Spule (`is_estimate` bei Mehrfarb)
+- `run_segments`: Abschnitte bei Rollenwechsel (Einlegen während Druck/Pause)
+- `run_samples`: Temperatur/Fortschritt ca. alle 30 s (Watcher)
+- `run_labels`: Objekt-Chargen `D-…-01`
+- `events.run_id`: optionaler Bezug zum Lauf
+
+## Abzug
+
+`grotti/usage.py` rechnet Ist-Gramm aus `filament_used` / `filament_total` × Soll. Abbruch ohne Extrusion: 0. Ohne Zähler: Fortschritt × Soll (Schätzwert). Fertig ohne Messgröße: Soll bleibt, Quelle `estimate`.
+
+`apply_deduction` schreibt zuerst `run_spools`, dann `deducted`/`remaining_g` (auch unter 0); `ensure_run_chargen` oft schon während des Laufs. Ohne `run_spools` bleibt die Spulenakte leer.
+
+## Live
+
+`StateWatcher` hängt am offenen History-Job oder legt `live:…` an, schreibt Proben, vergibt `chargen_nr`, merkt Objektnamen. Vor neuem Start: `abandon_live_runs`. `sync_history` übernimmt Proben/Segmente/Charge (`adopt_live_run`, nicht auf ältere fertige Jobs derselben Datei) und setzt bei Bedarf `needs_clear`.
+
+## Statistik-Filter
+
+`since` inklusiv, reines `until` als Datum (`YYYY-MM-DD`) inklusiv (intern Folgetag exklusiv). Presets in der UI setzen Von/Bis. CSV nutzt dieselben Query-Parameter.

docs/internal/Features-UI.md

@@ -37,10 +37,15 @@ Stand **14.10.2026**, v1.4.0.
 
 ## Material
 
-- Reiter **Spulen** / **Sorten**. Scan-Feld im Seitenkopf.
+- Reiter **Spulen** / **Sorten**. Scan-Feld im Seitenkopf (`S-…` Spule, `D-…` Druckbericht).
-- Spulen: Filter Alle / Am Drucker / Regal / Wenig Rest + Suche. Formular nur bei Auswahl oder „Neue Spule“ (× schließt). Ort = Drucker · ACE/extern bzw. Regal.
+- Spulen: Filter Alle / Am Drucker / Regal / Wenig Rest + Suche. Formular nur bei Auswahl oder „Neue Spule“ (× schließt). Ort = Drucker · ACE/extern bzw. Regal. Akte mit Verbrauch und Leer-in.
 - Sorten: Profile (Dichte, mm³/s, Preis, Maschinen). Anlegen/ändern/löschen; „Spule damit anlegen“ wechselt zum Spulen-Reiter.
 
+## Protokoll und Statistik
+
+- Protokoll-Zeile → Druckbericht `/protokoll/<id>` (Soll/Ist, Spulen, Temperatur, Charge, Etiketten). Charge schon am laufenden Druck; Etikett an der Wand und im Bericht.
+- Statistik `/statistik`: KPIs, nach Drucker/Material, Zeitraum-Presets, CSV mit denselben Filtern.
+
 ## Warteschlange
 
 - Seite `/warteschlange`: Filter Läuft / Wartet / Fehler / Historie. Priorität, Abbrechen, Fortsetzen.

docs/internal/Senden-Queue.md

@@ -20,6 +20,8 @@ Ab 12.10.2026: Start legt Hintergrund-Aufträge an (`pending` → `running` →
 
 `watch_dir` in `config.json` zeigt auf den Slice-Ordner der Bibliothek. Ohne Ordner geht Hochladen über die Dateien-Seite trotzdem.
 
+**Dateinamen:** Moonraker-Multipart nutzt nur noch einen ASCII-`filename` (`moonraker.safe_upload_name`). Früher standen Nicht-ASCII-Zeichen in `filename*=UTF-8''…`, während `filename=` Unterstriche bekam — gklib speicherte A, Start suchte B → **10115 not found**.
+
 ## ACE / `.acm`
 
 Drucker mit ACE/MMU-Plätzen (`mmu.gate_color` / `gate_material`, Grotti-`slots`) brauchen vor `print/start` eine Sidecar-Datei `*.gcode.acm`. In der UI unter Optionen → ACE-Zuordnung (Datei-Farbe → Platz). Ohne passende `.acm` lehnt der Drucker oft mit „cannot parse the file“ ab — Details hier, nicht als Banner in der App:

grotti/jobs.py

@@ -5,7 +5,7 @@ import urllib.error
 from concurrent.futures import ThreadPoolExecutor
 from datetime import datetime, timezone
 
-from grotti import acm, eject, library, moonraker, store
+from grotti import acm, eject, library, moonraker, store, usage
 from grotti.cost import energy_cost
 from grotti.errors import GrottiError
 from grotti.parse import content_has_ace_trailer, prepare_rinkhals_gcode
@@ -15,17 +15,7 @@ TERMINAL = {"completed", "cancelled", "error", "interrupted"}
 
 
 def weight_of(metadata):
-    raw = (metadata or {}).get("filament_weight_total")
+    return usage.weight_sum(metadata)
-    if isinstance(raw, list):
-        return sum(float(item or 0) for item in raw)
-    if isinstance(raw, (int, float)):
-        return float(raw)
-    if isinstance(raw, str):
-        try:
-            return float(raw.replace(",", "."))
-        except ValueError:
-            return 0.0
-    return 0.0
 
 
 def material_of(metadata):
@@ -35,6 +25,37 @@ def material_of(metadata):
     return str(raw).split(";")[0].strip()
 
 
+def _ace_map_of(sent):
+    if not sent:
+        return []
+    raw = sent.get("ace_map")
+    if isinstance(raw, list):
+        return acm.normalize_mapping(raw)
+    if isinstance(raw, str):
+        try:
+            return acm.normalize_mapping(json.loads(raw))
+        except json.JSONDecodeError:
+            return []
+    return []
+
+
+def _targets_from_ace(conn, host, ace):
+    targets = []
+    for item in ace:
+        slot = int(item["ams_index"]) + 1
+        row = conn.execute(
+            """
+            SELECT * FROM spools
+            WHERE printer_host = %s AND ace_slot = %s
+            ORDER BY id LIMIT 1
+            """,
+            (host, slot),
+        ).fetchone()
+        if row:
+            targets.append(row)
+    return targets
+
+
 def unix_to_dt(value):
     if not value:
         return None
@@ -128,50 +149,152 @@ def assert_spool_at_host(conn, spool_id, host):
         )
 
 
-def apply_deduction(conn, run, energy):
+def apply_deduction(conn, run, energy, metadata=None):
-    if run["deducted"] or run["weight_g"] <= 0 or run["state"] not in TERMINAL:
+    if run["deducted"] or run["state"] not in TERMINAL:
         return False
-    weight = float(run["weight_g"] or 0)
+    planned = float(run.get("weight_planned_g") or run.get("weight_g") or 0)
-    # ACE: Abzug anteilig auf die Plätze der letzten Sendung
+    used = float(run.get("weight_used_g") or 0)
+    source = run.get("weight_source") or ""
+    if used <= 0 and planned > 0 and source != "none":
+        used, source = usage.resolve_used_grams(
+            planned,
+            run.get("filament_used_mm") or 0,
+            run.get("filament_total_mm") or 0,
+            run.get("progress_last") or 0,
+            run["state"],
+            run.get("duration_s") or 0,
+        )
+    if used <= 0:
+        return False
+
     sent = store.latest_send(conn, run["printer_host"], run.get("filename") or "")
-    ace = []
+    ace = _ace_map_of(sent)
-    if sent:
+    meta = metadata or {}
-        raw = sent.get("ace_map")
+    if not meta and run.get("file_id"):
-        if isinstance(raw, list):
+        file_row = store.get_file_row(conn, run["file_id"]) if hasattr(store, "get_file_row") else None
-            ace = raw
+        if file_row:
-        elif isinstance(raw, str):
+            meta = {"filament_weight_total": file_row.get("weight_g") or planned}
-            try:
+
-                ace = json.loads(raw)
+    store.close_open_segments(conn, run["id"], None, run.get("filament_used_mm") or 0)
-            except json.JSONDecodeError:
+    segments = store.list_run_segments(conn, run["id"])
-                ace = []
+
-    targets = []
+    entries = []
-    if ace:
+    targets = _targets_from_ace(conn, run["printer_host"], ace) if ace else []
-        for item in acm.normalize_mapping(ace):
-            slot = int(item["ams_index"]) + 1
-            row = conn.execute(
-                """
-                SELECT * FROM spools
-                WHERE printer_host = %s AND ace_slot = %s
-                ORDER BY id LIMIT 1
-                """,
-                (run["printer_host"], slot),
-            ).fetchone()
-            if row:
-                targets.append(row)
     if not targets and run.get("spool_id"):
         spool = store.get_spool_row(conn, run["spool_id"])
         if spool:
             targets = [spool]
-    if not targets:
+    # Abschnitte ohne ACE-Map: externe Rollen nacheinander
+    if segments and not ace:
+        final_mm = float(run.get("filament_used_mm") or 0)
+        total_mm = float(run.get("filament_total_mm") or 0)
+        deltas = usage.segment_deltas(segments, final_mm)
+        for spool_id, ace_slot, delta_mm in deltas:
+            spool = store.get_spool_row(conn, spool_id)
+            if not spool:
+                continue
+            grams = usage.grams_from_mm(delta_mm, total_mm, planned)
+            cost = (grams / 1000.0) * float(spool.get("price_per_kg") or 0)
+            entries.append({
+                "spool_id": spool_id,
+                "ace_slot": ace_slot,
+                "weight_g": grams,
+                "weight_planned_g": planned / max(1, len(deltas)),
+                "cost": cost,
+                "is_estimate": source != "measured",
+            })
+    elif targets:
+        shares = usage.planned_shares(meta, ace, len(targets))
+        parts, is_estimate = usage.split_used(used, shares, multi=len(targets) > 1)
+        if source != "measured":
+            is_estimate = True
+        # ACE-Rollenwechsel: Anteil der gewechselten Farbe nach mm aufteilen
+        by_slot = {}
+        if segments and ace:
+            final_mm = float(run.get("filament_used_mm") or 0)
+            for spool_id, ace_slot, delta_mm in usage.segment_deltas(segments, final_mm):
+                by_slot.setdefault(ace_slot, []).append((spool_id, delta_mm))
+        for index, spool in enumerate(targets):
+            plan = shares[index] if index < len(shares) else 0
+            grams = parts[index] if index < len(parts) else 0
+            slot = spool.get("ace_slot")
+            slot_segs = by_slot.get(slot) or []
+            if len(slot_segs) > 1:
+                mm_sum = sum(d for _, d in slot_segs) or 1.0
+                for seg_spool_id, delta_mm in slot_segs:
+                    seg_spool = store.get_spool_row(conn, seg_spool_id)
+                    if not seg_spool:
+                        continue
+                    share_g = grams * (delta_mm / mm_sum)
+                    cost = (share_g / 1000.0) * float(seg_spool.get("price_per_kg") or 0)
+                    entries.append({
+                        "spool_id": seg_spool_id,
+                        "ace_slot": slot,
+                        "weight_g": share_g,
+                        "weight_planned_g": plan / len(slot_segs),
+                        "cost": cost,
+                        "is_estimate": True,
+                    })
+            else:
+                cost = (grams / 1000.0) * float(spool.get("price_per_kg") or 0)
+                entries.append({
+                    "spool_id": spool["id"],
+                    "ace_slot": slot,
+                    "weight_g": grams,
+                    "weight_planned_g": plan,
+                    "cost": cost,
+                    "is_estimate": is_estimate,
+                })
+    elif segments:
+        # Fallback: Abschnitte ohne aktuelle Targets
+        final_mm = float(run.get("filament_used_mm") or 0)
+        total_mm = float(run.get("filament_total_mm") or 0)
+        for spool_id, ace_slot, delta_mm in usage.segment_deltas(segments, final_mm):
+            spool = store.get_spool_row(conn, spool_id)
+            if not spool:
+                continue
+            grams = usage.grams_from_mm(delta_mm, total_mm, planned)
+            cost = (grams / 1000.0) * float(spool.get("price_per_kg") or 0)
+            entries.append({
+                "spool_id": spool_id,
+                "ace_slot": ace_slot,
+                "weight_g": grams,
+                "weight_planned_g": 0,
+                "cost": cost,
+                "is_estimate": source != "measured",
+            })
+    else:
         return False
-    share = weight / len(targets)
+
-    filament = sum((share / 1000) * float(spool["price_per_kg"] or 0) for spool in targets)
+    if not entries:
+        return False
+    used_total = sum(item["weight_g"] for item in entries)
+    filament = sum(item["cost"] for item in entries)
     power = energy_cost(run["duration_s"], energy)
-    marked = store.mark_deducted(conn, run["id"], targets[0]["id"], filament, power)
+    # run_spools vor deducted=true, sonst bleibt die Akte leer bei Abbruch dazwischen
+    store.replace_run_spools(conn, run["id"], entries)
+    marked = store.mark_deducted(
+        conn,
+        run["id"],
+        entries[0]["spool_id"],
+        filament,
+        power,
+        weight_used_g=used_total,
+        weight_source=source or ("estimate" if any(e["is_estimate"] for e in entries) else "measured"),
+    )
     if not marked:
+        store.replace_run_spools(conn, run["id"], [])
         return False
-    for spool in targets:
+    for item in entries:
-        store.deduct_spool(conn, spool["id"], share)
+        store.deduct_spool(conn, item["spool_id"], item["weight_g"])
+    store.ensure_run_chargen(conn, run["id"], used_total)
+    objects = run.get("objects")
+    if isinstance(objects, str):
+        try:
+            objects = json.loads(objects)
+        except json.JSONDecodeError:
+            objects = []
+    store.ensure_run_labels(conn, run["id"], objects or [], qty=1)
     return True
 
 
@@ -190,13 +313,16 @@ def sync_history(conn, cfg):
     deducted = 0
     for printer, job in collected:
         job_id = str(job.get("job_id") or "")
-        if not job_id:
+        if not job_id or str(job_id).startswith("live:"):
             continue
         filename = job.get("filename") or ""
         metadata = job.get("metadata") or {}
-        weight = weight_of(metadata)
+        planned = weight_of(metadata)
         material = material_of(metadata)
         state = job.get("status") or ""
+        used_mm = usage.filament_used_mm(job)
+        total_mm = usage.filament_total_mm(metadata, job)
+        estimated = float(metadata.get("estimated_time") or 0)
         sent = store.latest_send(conn, printer["host"], filename)
         known = store.file_by_name(conn, filename)
         file_id = (sent or {}).get("file_id") or (known or {}).get("id")
@@ -204,6 +330,23 @@ def sync_history(conn, cfg):
         hinted = (sent or {}).get("spool_id") or (known or {}).get("spool_id")
         spool = choose_spool(conn, printer["host"], material, hinted)
         terminal = state in TERMINAL
+        live = store.find_live_run(conn, printer["host"], filename)
+        progress = float((live or {}).get("progress_last") or 0)
+        if used_mm <= 0 and live:
+            used_mm = float(live.get("filament_used_mm") or 0)
+        if total_mm <= 0 and live:
+            total_mm = float(live.get("filament_total_mm") or 0)
+        if planned <= 0 and live:
+            planned = float(live.get("weight_planned_g") or 0)
+        objects = (live or {}).get("objects") or []
+        if isinstance(objects, str):
+            try:
+                objects = json.loads(objects)
+            except json.JSONDecodeError:
+                objects = []
+        used_g, source = usage.resolve_used_grams(
+            planned, used_mm, total_mm, progress, state, job.get("print_duration") or 0
+        )
         row = store.upsert_run(conn, {
             "printer_host": printer["host"],
             "printer_name": printer["name"],
@@ -215,13 +358,33 @@ def sync_history(conn, cfg):
             "started_at": unix_to_dt(job.get("start_time")),
             "ended_at": unix_to_dt(job.get("end_time")),
             "duration_s": float(job.get("print_duration") or job.get("total_duration") or 0),
-            "weight_g": weight,
+            "weight_g": planned,
+            "weight_planned_g": planned,
+            "weight_used_g": used_g,
+            "weight_source": source,
+            "filament_used_mm": used_mm,
+            "filament_total_mm": total_mm,
+            "progress_last": progress,
+            "estimated_s": estimated,
             "energy_cost": energy_cost(job.get("print_duration") or job.get("total_duration") or 0, cfg["energy"]),
             "moonraker_job_id": job_id,
-            "needs_spool": bool(terminal and weight > 0 and not spool),
+            "needs_spool": bool(terminal and used_g > 0 and not spool),
             "material_type": material,
+            "message": (job.get("message") or "") if state == "error" else "",
+            "objects": objects,
         })
-        if apply_deduction(conn, row, cfg["energy"]):
+        # Live sofort auf History hängen — auch solange noch in_progress (eine Protokoll-Zeile)
+        store.adopt_live_run(conn, printer["host"], filename, row["id"])
+        row = store.get_run_row(conn, row["id"])
+        if terminal:
+            # Nachzug nicht während eines neuen Live-Drucks — sonst „Platte belegt“ zu Unrecht
+            active = store.find_live_run(conn, printer["host"])
+            if not active:
+                ended = row.get("ended_at") or unix_to_dt(job.get("end_time"))
+                store.ensure_bed_after_print(
+                    conn, printer["host"], ended_at=ended, message=filename or state
+                )
+        if apply_deduction(conn, row, cfg["energy"], metadata=metadata):
             deducted += 1
     return {"gelesen": len(collected), "abgezogen": deducted}
 
@@ -373,7 +536,11 @@ def send_file(
         filaments = [{"type": "PLA", "color": ""}]
 
     progress("vorbereiten", 30, "Datei vorbereiten…")
-    filename, content, plate = library.printer_file(row)
+    filename, content, plate = library.printer_file(
+        row, conn=conn, data_dir=(cfg or {}).get("data_dir")
+    )
+    # CJK/Unicode im Namen → Rinkhals 10115 not found (Upload ≠ Start-Name)
+    filename = moonraker.safe_upload_name(filename)
     ace_tools = [item.get("paint_index") for item in mapping] if mapping else None
     if (row.get("kind") or "") == "gcode" and str(filename).endswith(".gcode"):
         content = prepare_rinkhals_gcode(content, tools=ace_tools)
@@ -484,6 +651,33 @@ def steuern(conn, host, action, params=None):
     printer = store.printer_by_host(conn, host)
     if not printer:
         raise GrottiError("Diesen Drucker kennt Grotti nicht.", "drucker", 404)
+    params = dict(params) if isinstance(params, dict) else {}
+    if action == "slot_setzen":
+        try:
+            ace_slot = int(params.get("ace_slot"))
+        except (TypeError, ValueError) as exc:
+            raise GrottiError("ACE-Platz muss 1–8 sein.", "platz") from exc
+        spool = None
+        for row in store.spools_for_printer(conn, host):
+            raw_slot = row.get("ace_slot")
+            if raw_slot in (None, ""):
+                continue
+            try:
+                if int(raw_slot) == ace_slot:
+                    spool = row
+                    break
+            except (TypeError, ValueError):
+                continue
+        if not spool:
+            raise GrottiError("Auf diesem Platz liegt keine Spule in Grotti.", "spule")
+        material = (spool.get("material_type") or "").strip()
+        if not material:
+            raise GrottiError("Die Spule braucht eine Sorte.", "material")
+        color = moonraker.spool_rgb(spool)
+        if not color:
+            raise GrottiError("Die Spule braucht eine Farbe.", "farbe")
+        hub_id, index = moonraker.ace_hub_index(ace_slot)
+        params = {"id": hub_id, "index": index, "type": material, "color": color}
     try:
         moonraker.steuern(host, action, params)
     except moonraker.PrinterError as exc:

grotti/library.py

@@ -142,8 +142,30 @@ def ensure_library_gcode(conn, cfg, host, filename):
     return save_upload(conn, name, content, cfg)
 
 
-def printer_file(row):
+def resolve_stored_path(conn, row, data_dir=None):
-    path = Path(row["stored_path"])
+    """Gespeicherter Pfad, ggf. nach Umzug von data_dir unter eingang/<name> wiederfinden."""
+    stored = (row or {}).get("stored_path") or ""
+    path = Path(stored) if stored else None
+    if path and path.is_file():
+        return path
+    name = (row or {}).get("name") or (path.name if path else "")
+    if not name or data_dir is None:
+        return None
+    candidate = Path(data_dir) / "eingang" / name
+    if not candidate.is_file():
+        return None
+    resolved = str(candidate.resolve())
+    file_id = (row or {}).get("id")
+    if file_id and conn is not None:
+        conn.execute("UPDATE files SET stored_path = %s WHERE id = %s", (resolved, file_id))
+    row["stored_path"] = resolved
+    return candidate.resolve()
+
+
+def printer_file(row, conn=None, data_dir=None):
+    path = resolve_stored_path(conn, row, data_dir) if (conn is not None or data_dir is not None) else Path(row["stored_path"])
+    if path is None:
+        path = Path(row.get("stored_path") or "")
     if not path.is_file():
         raise GrottiError("Die Datei liegt nicht mehr auf der Platte.", "datei", 404)
     if row["kind"] == "gcode":
@@ -153,9 +175,9 @@ def printer_file(row):
     return path.name, path.read_bytes(), row["plate"] or ""
 
 
-def preview_png(row):
+def preview_png(row, conn=None, data_dir=None):
-    path = Path(row["stored_path"])
+    path = resolve_stored_path(conn, row, data_dir) if (conn is not None or data_dir is not None) else Path(row["stored_path"])
-    if not path.is_file():
+    if path is None or not path.is_file():
         return None
     entry = row["thumb_entry"]
     if row["kind"] == "gcode":

grotti/moonraker.py

@@ -165,18 +165,53 @@ def post_json(host, path, payload, timeout=20):
         raise PrinterError("Der Drucker ist nicht erreichbar.") from exc
 
 
+def safe_upload_name(filename):
+    """Dateiname für Moonraker/Rinkhals/gklib — nur ASCII.
+
+    `filename` vs. `filename*` mit CJK führte zu Upload unter `_` und Start
+    unter dem Originalnamen → Fehler 10115 „gcode … not found“.
+    """
+    raw = (filename or "").replace("\\", "/")
+    parts = [part for part in raw.split("/") if part]
+    base = parts[-1] if parts else "job.gcode"
+    out = []
+    for ch in base:
+        if ch.isascii() and ch not in '"\\':
+            out.append(ch if ch not in " \t" else "_")
+        else:
+            out.append("_")
+    text = "".join(out)
+    while "__" in text:
+        text = text.replace("__", "_")
+    while "_-" in text or "-_" in text:
+        text = text.replace("_-", "-").replace("-_", "-")
+    text = text.strip("._-") or "job"
+    lower = text.lower()
+    if not (lower.endswith(".gcode") or lower.endswith(".gcode.3mf") or lower.endswith(".3mf") or lower.endswith(".acm")):
+        # Suffix vom Original behalten, falls nur der Stamm zerstört wurde
+        if base.lower().endswith(".gcode.3mf"):
+            text += ".gcode.3mf"
+        elif base.lower().endswith(".gcode"):
+            text += ".gcode"
+        elif base.lower().endswith(".acm"):
+            text += ".acm"
+    if parts:
+        parts[-1] = text
+        return "/".join(parts)
+    return text
+
+
 def multipart(filename, content):
     boundary = "----GrottiBoundary7f3a"
-    ascii_name = "".join(ch if ch.isascii() and ch not in '"\\' else "_" for ch in filename) or "job.gcode"
+    name = safe_upload_name(filename)
-    quoted = urllib.parse.quote(filename)
     fields = (
         "--%s\r\nContent-Disposition: form-data; name=\"root\"\r\n\r\ngcodes\r\n" % boundary
     ).encode("ascii")
     head = (
         "--%s\r\n"
-        "Content-Disposition: form-data; name=\"file\"; filename=\"%s\"; filename*=UTF-8''%s\r\n"
+        "Content-Disposition: form-data; name=\"file\"; filename=\"%s\"\r\n"
         "Content-Type: application/octet-stream\r\n\r\n"
-    ) % (boundary, ascii_name, quoted)
+    ) % (boundary, name)
     tail = ("\r\n--%s--\r\n" % boundary).encode("ascii")
     return boundary, fields + head.encode("ascii") + content + tail
 
@@ -217,6 +252,7 @@ def upload_timeout(size):
 
 
 def upload(host, filename, content, on_progress=None):
+    filename = safe_upload_name(filename)
     boundary, body = multipart(filename, content)
     stream = _UploadBody(body, on_progress=on_progress)
     request = urllib.request.Request(
@@ -236,7 +272,8 @@ def upload(host, filename, content, on_progress=None):
     except (urllib.error.URLError, TimeoutError) as exc:
         raise PrinterError("Hochladen ist fehlgeschlagen.") from exc
     item = (payload.get("result") or {}).get("item") or {}
-    return item.get("path") or filename
+    # Immer denselben ASCII-Namen nutzen, den wir hochgeladen haben
+    return safe_upload_name(item.get("path") or filename)
 
 
 def start_print(host, filename, bed_leveling=False, ams_settings=None):
@@ -381,6 +418,64 @@ def steuern(host, action, params=None):
         if not re.fullmatch(r"[A-Za-z0-9._+\-]+", name):
             raise PrinterError("Ungültiger Objektname.")
         return gcode_script(host, "EXCLUDE_OBJECT NAME=%s" % name, timeout=20)
+    if action == "dryer_start":
+        try:
+            unit = int(params.get("id"))
+        except (TypeError, ValueError) as exc:
+            raise PrinterError("ACE-Box muss 0 oder 1 sein.") from exc
+        if unit not in (0, 1):
+            raise PrinterError("ACE-Box muss 0 oder 1 sein.")
+        try:
+            temp = int(round(float(params.get("temp"))))
+            duration = int(round(float(params.get("duration"))))
+        except (TypeError, ValueError) as exc:
+            raise PrinterError("Temperatur und Dauer müssen Zahlen sein.") from exc
+        if temp < 35 or temp > 65:
+            raise PrinterError("Trockner-Temperatur außerhalb 35–65 °C.")
+        if duration < 1 or duration > 720:
+            raise PrinterError("Trockner-Dauer außerhalb 1–720 Minuten.")
+        return post_json(
+            host,
+            "/server/filament_hub/start_drying",
+            {"id": unit, "temp": temp, "duration": duration, "fan_speed": 0},
+            timeout=15,
+        )
+    if action == "dryer_stop":
+        try:
+            unit = int(params.get("id"))
+        except (TypeError, ValueError) as exc:
+            raise PrinterError("ACE-Box muss 0 oder 1 sein.") from exc
+        if unit not in (0, 1):
+            raise PrinterError("ACE-Box muss 0 oder 1 sein.")
+        return post_json(host, "/server/filament_hub/stop_drying", {"id": unit}, timeout=15)
+    if action == "slot_setzen":
+        hub_id = _int_or_none(params.get("id"))
+        index = _int_or_none(params.get("index"))
+        if hub_id not in (0, 1) or index is None or index < 0 or index > 3:
+            raise PrinterError("ACE-Platz ungültig.")
+        material = str(params.get("type") or "").strip()
+        if not material:
+            raise PrinterError("Die Spule braucht eine Sorte.")
+        color = params.get("color")
+        if not isinstance(color, dict):
+            raise PrinterError("Die Spule braucht eine Farbe.")
+        try:
+            red = max(0, min(255, int(color.get("R"))))
+            green = max(0, min(255, int(color.get("G"))))
+            blue = max(0, min(255, int(color.get("B"))))
+        except (TypeError, ValueError) as exc:
+            raise PrinterError("Die Spule braucht eine Farbe.") from exc
+        return post_json(
+            host,
+            "/printer/filament_hub/set_filament_info",
+            {
+                "id": hub_id,
+                "index": index,
+                "type": material,
+                "color": {"R": red, "G": green, "B": blue},
+            },
+            timeout=15,
+        )
     if action == "firmware_restart":
         # GoKlipper/Rinkhals: FIRMWARE_RESTART deadlocked gklib (Rinkhals #32).
         raise PrinterError(
@@ -563,6 +658,80 @@ def extract_slots(status):
     return found[:8]
 
 
+def _int_or_none(value):
+    if isinstance(value, bool) or not isinstance(value, (int, float)):
+        return None
+    return int(value)
+
+
+def extract_dryers(status):
+    """Echte ACE-Boxen aus mmu_machine (num_gates > 0), Dummy-Unit bleibt weg."""
+    machine = (status or {}).get("mmu_machine")
+    if not isinstance(machine, dict):
+        return []
+    found = []
+    for unit_id in (0, 1):
+        unit = machine.get("unit_%d" % unit_id)
+        if not isinstance(unit, dict):
+            continue
+        gates = _int_or_none(unit.get("num_gates"))
+        if gates is None or gates < 1:
+            continue
+        found.append({
+            "id": unit_id,
+            "status": str(unit.get("dryer_status") or "stop"),
+            "temp": _int_or_none(unit.get("dryer_temp")) or 0,
+            "target": _int_or_none(unit.get("dryer_target_temp")) or 0,
+            "remain": _int_or_none(unit.get("dryer_remaining")) or 0,
+            "humidity": _int_or_none(unit.get("dryer_humidity")) or 0,
+            "gates": gates,
+        })
+    return found
+
+
+def ace_hub_index(ace_slot):
+    """Grotti-Platz 1–8 → Moonraker id (0/1) und index in der Box (0–3)."""
+    try:
+        slot = int(ace_slot)
+    except (TypeError, ValueError) as exc:
+        raise PrinterError("ACE-Platz muss 1–8 sein.") from exc
+    if slot < 1 or slot > 8:
+        raise PrinterError("ACE-Platz muss 1–8 sein.")
+    return (slot - 1) // 4, (slot - 1) % 4
+
+
+def spool_rgb(spool):
+    """Erste Farbe der Spule als RGB-Dict für set_filament_info."""
+    colors = (spool or {}).get("colors") or []
+    if isinstance(colors, str):
+        try:
+            colors = json.loads(colors)
+        except (json.JSONDecodeError, TypeError):
+            colors = []
+    hex_value = ""
+    if isinstance(colors, list):
+        for item in colors:
+            if isinstance(item, dict) and item.get("hex"):
+                hex_value = str(item["hex"]).strip()
+                break
+            if isinstance(item, str) and item.strip():
+                hex_value = item.strip()
+                break
+    if not hex_value:
+        hex_value = str((spool or {}).get("color") or "").strip()
+    if hex_value.startswith("#"):
+        hex_value = hex_value[1:]
+    if len(hex_value) == 8:
+        hex_value = hex_value[:6]
+    if len(hex_value) != 6 or any(ch not in "0123456789abcdefABCDEF" for ch in hex_value):
+        return None
+    return {
+        "R": int(hex_value[0:2], 16),
+        "G": int(hex_value[2:4], 16),
+        "B": int(hex_value[4:6], 16),
+    }
+
+
 def slots(host, status=None):
     if status is not None:
         found = extract_slots(status)
@@ -831,6 +1000,8 @@ def query(host):
     extras = []
     if "probe" in names:
         extras.append("probe")
+    if "mmu_machine" in names:
+        extras.append("mmu_machine")
     url = "http://%s/printer/objects/query?%s" % (host, "&".join([base] + extras))
     payload = fetch_json(url)
     status = payload["result"]["status"]
@@ -838,6 +1009,21 @@ def query(host):
     card = status.get("virtual_sdcard") or {}
     extruder = status.get("extruder") or {}
     bed = status.get("heater_bed") or {}
+    mmu = status.get("mmu") or {}
+    mmu_tool = mmu.get("tool")
+    if not isinstance(mmu_tool, (int, float)) or isinstance(mmu_tool, bool):
+        mmu_tool = mmu.get("gate")
+    if isinstance(mmu_tool, (int, float)) and not isinstance(mmu_tool, bool):
+        mmu_tool = int(mmu_tool)
+        if mmu_tool < 0:
+            mmu_tool = None
+    else:
+        mmu_tool = None
+    filament_used = stats.get("filament_used")
+    if not isinstance(filament_used, (int, float)) or isinstance(filament_used, bool):
+        filament_used = None
+    else:
+        filament_used = float(filament_used)
     raw_name = stats.get("filename") or ""
     filename = raw_name.replace("\\", "/").rsplit("/", 1)[-1] if raw_name else ""
     meta = metadata(host, raw_name) if raw_name else {}
@@ -896,8 +1082,15 @@ def query(host):
         "bed_target": bed.get("target"),
         "chamber": chamber,
         "chamber_target": chamber_target,
+        "filament_used": filament_used,
+        "filament_total": meta.get("filament_total") or 0,
+        "mmu_tool": mmu_tool,
         "material": card.get("filament_type") or meta.get("filament_type") or "",
-        "weight": meta.get("filament_weight_total") or 0,
+        "weight": (
+            sum(float(x or 0) for x in meta["filament_weight_total"])
+            if isinstance(meta.get("filament_weight_total"), list)
+            else (meta.get("filament_weight_total") or 0)
+        ),
         "height": meta.get("object_height") or 0,
         "layer_height": meta.get("layer_height") or card.get("layer_height") or 0,
         "estimated": meta.get("estimated_time") or 0,
@@ -915,6 +1108,7 @@ def query(host):
         "speed_factor": speed_factor,
         "extrude_factor": extrude_factor,
         "slots": slots(host, status),
+        "dryers": extract_dryers(status),
         "exclude": exclude_status(host),
         "anycubic_task": _anycubic_task_field(host),
     }
@@ -956,6 +1150,7 @@ def snapshot(printers):
                 "speed_factor": None,
                 "extrude_factor": None,
                 "slots": [],
+                "dryers": [],
                 "anycubic_task": None,
             })
             card.update(mesh_fields(printer["host"]))

grotti/notify.py

@@ -43,11 +43,11 @@ def alert_enabled(cfg, kind):
     return bool(alerts.get(key, key not in DEFAULT_OFF))
 
 
-def record(conn, cfg, host, printer, kind, message, filename="", dedupe_s=60):
+def record(conn, cfg, host, printer, kind, message, filename="", dedupe_s=60, run_id=None):
     """Ereignis immer speichern; Telegram nur einmal pro Art und Drucker im Zeitfenster."""
     from grotti import store
 
     recent = store.recent_event_kind(conn, host, kind, within_s=dedupe_s)
-    store.add_event(conn, host, printer, kind, message, filename or "")
+    store.add_event(conn, host, printer, kind, message, filename or "", run_id=run_id)
     if not recent and alert_enabled(cfg, kind):
         send_telegram(cfg, message)

grotti/schema.sql

@@ -215,3 +215,86 @@ CREATE TABLE IF NOT EXISTS oauth_identities (
     created_at timestamptz NOT NULL DEFAULT now(),
     UNIQUE (provider, subject)
 );
+
+-- Druckbericht: Soll/Ist, Charge, Live-Fortschritt
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS weight_planned_g double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS weight_used_g double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS weight_source text NOT NULL DEFAULT '';
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS filament_used_mm double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS filament_total_mm double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS progress_last double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS estimated_s double precision NOT NULL DEFAULT 0;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS chargen_nr text;
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS message text NOT NULL DEFAULT '';
+ALTER TABLE runs ADD COLUMN IF NOT EXISTS objects jsonb NOT NULL DEFAULT '[]'::jsonb;
+
+CREATE UNIQUE INDEX IF NOT EXISTS runs_chargen_nr
+    ON runs (chargen_nr) WHERE chargen_nr IS NOT NULL AND chargen_nr <> '';
+
+ALTER TABLE events ADD COLUMN IF NOT EXISTS run_id bigint REFERENCES runs (id) ON DELETE SET NULL;
+CREATE INDEX IF NOT EXISTS events_run ON events (run_id) WHERE run_id IS NOT NULL;
+
+-- Abzug je Spule (Messwert oder Schätzwert)
+CREATE TABLE IF NOT EXISTS run_spools (
+    id bigint GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
+    run_id bigint NOT NULL REFERENCES runs (id) ON DELETE CASCADE,
+    spool_id bigint NOT NULL REFERENCES spools (id) ON DELETE RESTRICT,
+    ace_slot smallint,
+    weight_g double precision NOT NULL DEFAULT 0,
+    weight_planned_g double precision NOT NULL DEFAULT 0,
+    cost double precision NOT NULL DEFAULT 0,
+    is_estimate boolean NOT NULL DEFAULT false,
+    UNIQUE (run_id, spool_id, ace_slot)
+);
+
+CREATE INDEX IF NOT EXISTS run_spools_spool ON run_spools (spool_id);
+CREATE INDEX IF NOT EXISTS run_spools_run ON run_spools (run_id);
+
+-- Abschnitte bei Rollenwechsel mitten im Druck
+CREATE TABLE IF NOT EXISTS run_segments (
+    id bigint GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
+    run_id bigint NOT NULL REFERENCES runs (id) ON DELETE CASCADE,
+    spool_id bigint NOT NULL REFERENCES spools (id) ON DELETE RESTRICT,
+    ace_slot smallint,
+    mm_start double precision NOT NULL DEFAULT 0,
+    mm_end double precision,
+    created_at timestamptz NOT NULL DEFAULT now(),
+    closed_at timestamptz
+);
+
+CREATE INDEX IF NOT EXISTS run_segments_run ON run_segments (run_id);
+CREATE INDEX IF NOT EXISTS run_segments_open
+    ON run_segments (run_id) WHERE mm_end IS NULL;
+
+-- Temperatur / Fortschritt während des Drucks
+CREATE TABLE IF NOT EXISTS run_samples (
+    id bigint GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
+    run_id bigint NOT NULL REFERENCES runs (id) ON DELETE CASCADE,
+    sampled_at timestamptz NOT NULL DEFAULT now(),
+    nozzle double precision,
+    nozzle_target double precision,
+    bed double precision,
+    bed_target double precision,
+    chamber double precision,
+    fan double precision,
+    speed_factor double precision,
+    extrude_factor double precision,
+    layer integer,
+    progress double precision,
+    filament_used_mm double precision,
+    mmu_tool smallint
+);
+
+CREATE INDEX IF NOT EXISTS run_samples_run_time ON run_samples (run_id, sampled_at);
+
+-- Objekt-Chargen für Etiketten
+CREATE TABLE IF NOT EXISTS run_labels (
+    id bigint GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
+    run_id bigint NOT NULL REFERENCES runs (id) ON DELETE CASCADE,
+    object_name text NOT NULL DEFAULT '',
+    chargen_nr text NOT NULL,
+    excluded boolean NOT NULL DEFAULT false,
+    UNIQUE (run_id, object_name)
+);
+
+CREATE UNIQUE INDEX IF NOT EXISTS run_labels_chargen ON run_labels (chargen_nr);

grotti/toolpath.py

@@ -8,8 +8,8 @@ MOVE = re.compile(r"^(?:G0|G00|G1|G01)\b(.*)$", re.IGNORECASE)
 # Auch E.39 / Z.6 ohne führende Null (Anycubic/Prusa-Stil)
 AXIS = re.compile(r"([XYZE])\s*(-?\d*\.?\d+)", re.IGNORECASE)
 
-# Cache-/Viewer-Version: Segment-IDs, kein Sehnen-Thinning
+# Cache-/Viewer-Version: ganze Z-Höhen dicht behalten (keine gesprenkelten Stichproben)
-TOOLPATH_VERSION = 5
+TOOLPATH_VERSION = 8
 
 
 def _gcode_text(path: Path) -> str:
@@ -28,48 +28,89 @@ def _gcode_text(path: Path) -> str:
     return path.read_text(encoding="utf-8", errors="replace")
 
 
+def _z_key(z):
+    return round(float(z), 2)
+
+
 def _thin_points(points, layer_breaks, max_points):
-    """Extrusions-Segmente stichprobenartig behalten — nie Endpunkte einer Bahn
+    """Pfad kürzen, ohne Wände zu sprenkeln.
-    weglassen und die Nachbarn verbinden (sonst Sehnen statt Infill)."""
+
+    Strategie: ganze Z-Höhen (Druckschichten) vollständig behalten und nur
+    ganze Höhen weglassen. Stichproben entlang der Bahn erzeugen Lücken.
+    """
     if len(points) <= max_points:
         return points, layer_breaks
 
-    extrude_ends = [i for i in range(1, len(points)) if points[i][3]]
+    # Nur Z-Höhen mit Extrusion — Z-Hops allein zählen nicht
-    keep = {0, len(points) - 1}
+    z_order = []
-    for break_i in layer_breaks:
+    seen = set()
-        keep.add(max(0, min(len(points) - 1, break_i)))
+    for point in points:
-        if break_i > 0:
+        if not point[3]:
-            keep.add(break_i - 1)
+            continue
+        key = _z_key(point[2])
+        if key not in seen:
+            seen.add(key)
+            z_order.append(key)
+    if not z_order:
+        return points[:max_points], [0]
 
-    # Budget für Segment-Endpunkte (jedes Segment braucht 2 Indizes, viele teilen sich)
+    def keep_for_zs(keep_zs):
-    target_segs = max(2000, max_points // 2)
+        keep = {0, len(points) - 1}
-    step = max(1, (len(extrude_ends) + target_segs - 1) // target_segs)
+        for i, point in enumerate(points):
-    for j, end_i in enumerate(extrude_ends):
+            if _z_key(point[2]) in keep_zs:
-        if j % step == 0:
+                keep.add(i)
+                if i > 0:
+                    keep.add(i - 1)
+        return sorted(keep)
+
+    # So viele Höhen wie ins Budget passen (Schätzung über mittlere Punkte/Höhe)
+    per_z = max(1, len(points) // max(1, len(z_order)))
+    max_zs = max(2, min(len(z_order), max_points // per_z))
+    stride = max(1, (len(z_order) + max_zs - 1) // max_zs)
+
+    def pick_zs(step):
+        chosen = {z_order[0], z_order[-1]}
+        for i in range(0, len(z_order), step):
+            chosen.add(z_order[i])
+        return chosen
+
+    step = stride
+    ordered = keep_for_zs(pick_zs(step))
+    while len(ordered) > max_points and step < len(z_order):
+        step += 1
+        ordered = keep_for_zs(pick_zs(step))
+
+    # Immer noch zu groß: innerhalb behaltener Höhen jedes n-te Extrusionssegment
+    if len(ordered) > max_points:
+        keep_zs = pick_zs(step)
+        segs = [
+            i
+            for i in range(1, len(points))
+            if points[i][3] and _z_key(points[i][2]) in keep_zs
+        ]
+        budget = max(1, (max_points - 4) // 2)
+        seg_step = max(1, (len(segs) + budget - 1) // budget)
+        keep = {0, len(points) - 1}
+        for end_i in segs[::seg_step]:
             keep.add(end_i - 1)
             keep.add(end_i)
-
+        ordered = sorted(keep)
-    ordered = sorted(keep)
-    # Falls immer noch zu groß: Segmente grober
-    if len(ordered) > max_points:
-        step2 = max(1, (len(ordered) + max_points - 1) // max_points)
-        ordered = ordered[::step2]
-        if ordered[-1] != len(points) - 1:
-            ordered.append(len(points) - 1)
 
     index_map = {old: new for new, old in enumerate(ordered)}
     kept = [points[i] for i in ordered]
-    new_breaks = sorted({
+    new_breaks = []
-        index_map[b]
+    last_z = None
-        for b in layer_breaks
+    for new_i, point in enumerate(kept):
-        if b in index_map
+        z = _z_key(point[2])
-    })
+        if last_z is None or abs(z - last_z) > 0.01:
+            new_breaks.append(new_i)
+            last_z = z
     if not new_breaks:
         new_breaks = [0]
     return kept, new_breaks
 
 
-def build_toolpath(path: Path, max_points=120000):
+def build_toolpath(path: Path, max_points=220000):
     text = _gcode_text(path)
     if not text:
         return {

grotti/usage.py

@@ -0,0 +1,164 @@
+"""Ist-Gramm aus Moonraker-Filamentzählern und Spulenanteilen."""
+
+from __future__ import annotations
+
+
+def as_float(value, default=0.0):
+    if value is None or value is False:
+        return float(default)
+    if isinstance(value, bool):
+        return float(default)
+    if isinstance(value, (int, float)):
+        return float(value)
+    if isinstance(value, str):
+        try:
+            return float(value.replace(",", ".").strip())
+        except ValueError:
+            return float(default)
+    if isinstance(value, list):
+        return sum(as_float(item) for item in value)
+    return float(default)
+
+
+def weight_list(metadata):
+    """Gramm je Farbe aus filament_weight_total (Zahl oder Liste)."""
+    raw = (metadata or {}).get("filament_weight_total")
+    if isinstance(raw, list):
+        return [as_float(item) for item in raw]
+    total = as_float(raw)
+    return [total] if total > 0 else []
+
+
+def weight_sum(metadata):
+    return sum(weight_list(metadata))
+
+
+def filament_total_mm(metadata, job=None):
+    raw = (metadata or {}).get("filament_total")
+    if raw in (None, "", [], 0, 0.0) and isinstance(job, dict):
+        raw = job.get("filament_total")
+    if isinstance(raw, list):
+        return sum(as_float(item) for item in raw)
+    return as_float(raw)
+
+
+def filament_used_mm(job):
+    if not isinstance(job, dict):
+        return 0.0
+    return as_float(job.get("filament_used"))
+
+
+def planned_shares(metadata, ace_map, target_count):
+    """Geplante Gramm je Ziel-Spule. Index entspricht targets-Reihenfolge."""
+    weights = weight_list(metadata)
+    mapping = ace_map if isinstance(ace_map, list) else []
+    if weights and mapping and len(weights) >= len(mapping) and target_count == len(mapping):
+        shares = []
+        for item in mapping:
+            paint = item.get("paint_index")
+            try:
+                index = int(paint)
+            except (TypeError, ValueError):
+                index = len(shares)
+            if 0 <= index < len(weights):
+                shares.append(weights[index])
+            else:
+                shares.append(0.0)
+        if sum(shares) > 0:
+            return shares
+    if weights and target_count == len(weights):
+        return list(weights)
+    total = sum(weights) if weights else 0.0
+    if target_count <= 0:
+        return []
+    if total <= 0:
+        return [0.0] * target_count
+    each = total / target_count
+    return [each] * target_count
+
+
+def resolve_used_grams(planned_g, used_mm, total_mm, progress, state, duration_s):
+    """
+    Ist-Gramm und Herkunft.
+    measured = filament_used, estimate = Fortschritt oder Soll, none = nichts.
+    """
+    planned = max(0.0, as_float(planned_g))
+    used = max(0.0, as_float(used_mm))
+    total = max(0.0, as_float(total_mm))
+    prog = max(0.0, min(1.0, as_float(progress)))
+    duration = max(0.0, as_float(duration_s))
+    terminal_abort = state in ("cancelled", "error", "interrupted")
+
+    if used > 0.5 and total > 0:
+        grams = planned * (used / total) if planned > 0 else 0.0
+        if grams <= 0 and used > 0.5:
+            # Länge ohne Gewicht: grob 1.24 g/cm³ · 1.75 mm → ~3 g/m
+            grams = used * 0.003
+        return max(0.0, grams), "measured"
+
+    if used > 0.5 and planned > 0 and total <= 0:
+        # Millimeter da, Gesamtlänge fehlt — Fortschritt oder Dauer helfen nicht
+        return used * 0.003, "estimate"
+
+    if terminal_abort and used <= 0.5:
+        if prog > 0.005 and planned > 0:
+            return planned * prog, "estimate"
+        return 0.0, "none"
+
+    if planned > 0:
+        if prog > 0.005 and prog < 0.995 and state != "completed":
+            return planned * prog, "estimate"
+        return planned, "estimate" if state == "completed" else "none"
+
+    return 0.0, "none"
+
+
+def split_used(used_g, planned_shares_list, multi):
+    """
+    Ist-Gramm auf Spulen verteilen.
+    multi=True → Anteile sind Schätzwerte, Summe bleibt used_g.
+    """
+    used = max(0.0, as_float(used_g))
+    shares = [max(0.0, as_float(s)) for s in (planned_shares_list or [])]
+    if not shares:
+        return [], False
+    total_plan = sum(shares)
+    if total_plan <= 0:
+        each = used / len(shares)
+        parts = [each] * len(shares)
+    else:
+        parts = [used * (share / total_plan) for share in shares]
+    is_estimate = bool(multi) and len(shares) > 1
+    return parts, is_estimate
+
+
+def segment_deltas(segments, final_mm):
+    """
+    Abschnitte mit mm_start/mm_end → Delta-mm je (spool_id, ace_slot).
+    Offene Abschnitte schließen auf final_mm.
+    """
+    end = max(0.0, as_float(final_mm))
+    totals = {}
+    order = []
+    for seg in segments or []:
+        start = max(0.0, as_float(seg.get("mm_start")))
+        raw_end = seg.get("mm_end")
+        stop = end if raw_end is None else max(0.0, as_float(raw_end))
+        delta = max(0.0, stop - start)
+        key = (seg.get("spool_id"), seg.get("ace_slot"))
+        if key not in totals:
+            totals[key] = 0.0
+            order.append(key)
+        totals[key] += delta
+    return [(key[0], key[1], totals[key]) for key in order]
+
+
+def grams_from_mm(delta_mm, total_mm, planned_g):
+    delta = max(0.0, as_float(delta_mm))
+    total = max(0.0, as_float(total_mm))
+    planned = max(0.0, as_float(planned_g))
+    if delta <= 0:
+        return 0.0
+    if total > 0 and planned > 0:
+        return planned * (delta / total)
+    return delta * 0.003

grotti/version.py

@@ -1,3 +1,3 @@
 """Version von Grotti (SemVer). Bei jeder Änderung CHANGELOG.md mitführen."""
 
-__version__ = "2.2.0"
+__version__ = "2.5.1"

grotti/watcher.py

@@ -4,10 +4,13 @@ from __future__ import annotations
 
 import threading
 import time
+from datetime import datetime, timezone
 
-from grotti import moonraker, notify, store
+from grotti import moonraker, notify, store, usage
 from grotti.db import connect
 
+SAMPLE_EVERY_S = 30
+
 
 class StateWatcher:
     def __init__(self, database_url, cfg, interval=10):
@@ -21,6 +24,7 @@ class StateWatcher:
         self._updated_at = 0.0
         self._stop = threading.Event()
         self._thread = None
+        self._last_sample = {}
 
     def start(self):
         if self._thread and self._thread.is_alive():
@@ -79,6 +83,7 @@ class StateWatcher:
         prev = self._prev.get(host) or {}
         prev_state = (prev.get("state") or "").lower()
         prev_offline = bool(prev.get("offline"))
+        run_id = None
 
         if offline:
             hits = self._offline_hits.get(host, 0) + 1
@@ -89,16 +94,32 @@ class StateWatcher:
             return
 
         self._offline_hits[host] = 0
+        starting = (
+            bool(prev_state)
+            and prev_state not in ("printing", "paused")
+            and state == "printing"
+        )
+        if starting:
+            store.abandon_live_runs(conn, host)
+        if state in ("printing", "paused"):
+            run = self._track_print(conn, host, name, filename, live, state)
+            run_id = run["id"] if run else None
+
         if prev_offline:
-            self._emit(conn, host, name, "offline", "%s ist wieder erreichbar." % name, filename)
+            self._emit(conn, host, name, "offline", "%s ist wieder erreichbar." % name, filename, run_id)
-        elif prev_state and prev_state not in ("printing", "paused") and state == "printing":
+        elif starting:
-            self._emit(conn, host, name, "start", "%s druckt %s" % (name, filename or "einen Auftrag"), filename)
+            self._emit(
+                conn, host, name, "start",
+                "%s druckt %s" % (name, filename or "einen Auftrag"),
+                filename, run_id,
+            )
+            self._ensure_start_segment(conn, host, filename, live, run_id)
         elif prev_state == "printing" and state == "paused":
-            self._emit(conn, host, name, "start", "%s pausiert." % name, filename)
+            self._emit(conn, host, name, "start", "%s pausiert." % name, filename, run_id)
         elif prev_state == "paused" and state == "printing":
-            self._emit(conn, host, name, "start", "%s druckt weiter." % name, filename)
+            self._emit(conn, host, name, "start", "%s druckt weiter." % name, filename, run_id)
         elif prev_state == "printing" and state == "complete":
-            store.set_bed_needs_clear(conn, host, True, filename or "fertig")
+            store.ensure_bed_after_print(conn, host, message=filename or "fertig")
             self._emit(
                 conn,
                 host,
@@ -106,8 +127,8 @@ class StateWatcher:
                 "fertig",
                 "%s fertig: %s" % (name, filename or "Druck"),
                 filename,
+                run_id or (prev.get("run_id")),
             )
-            # Protokoll und Spulenabzug nicht erst nach manuellem Knopf
             try:
                 from grotti import jobs
 
@@ -115,7 +136,7 @@ class StateWatcher:
             except Exception as exc:
                 print("Watcher Abgleich %s: %s" % (host, exc), flush=True)
         elif prev_state in ("printing", "paused") and state in ("cancelled", "standby"):
-            store.set_bed_needs_clear(conn, host, True, filename or state)
+            store.ensure_bed_after_print(conn, host, message=filename or state)
             self._emit(
                 conn,
                 host,
@@ -123,10 +144,17 @@ class StateWatcher:
                 "abbruch",
                 "%s: Druck abgebrochen (%s)" % (name, filename or "ohne Datei"),
                 filename,
+                run_id or prev.get("run_id"),
             )
+            try:
+                from grotti import jobs
+
+                jobs.sync_history(conn, self.cfg)
+            except Exception as exc:
+                print("Watcher Abgleich %s: %s" % (host, exc), flush=True)
         elif state == "error" and prev_state != "error":
             if prev_state == "printing" or prev_state == "paused":
-                store.set_bed_needs_clear(conn, host, True, filename or "Fehler")
+                store.ensure_bed_after_print(conn, host, message=filename or "Fehler")
             msg = (live.get("message") or "").strip()
             if not msg or msg.lower() in ("error", "fehler"):
                 msg = "Ursache unbekannt — in Mainsail prüfen"
@@ -138,18 +166,19 @@ class StateWatcher:
                 "fehler",
                 "%s: %s · Heizung aus" % (name, msg),
                 filename,
+                run_id or prev.get("run_id"),
             )
+            try:
+                from grotti import jobs
+
+                jobs.sync_history(conn, self.cfg)
+            except Exception as exc:
+                print("Watcher Abgleich %s: %s" % (host, exc), flush=True)
         elif state == "error":
-            # Schon im Fehler, Heizer laufen noch → aus
             if (live.get("nozzle_target") or 0) > 0 or (live.get("bed_target") or 0) > 0:
                 self._cool_heaters(host)
-        elif state == "complete":
+        elif state == "complete" and (not prev_state or prev_offline):
-            known = conn.execute(
+            store.ensure_bed_after_print(conn, host, message=filename or "fertig")
-                "SELECT 1 FROM bed_status WHERE host = %s", (host,)
-            ).fetchone()
-            if not known:
-                # Erster Stand nach Deploy: fertiger Druck ohne Quittierung
-                store.set_bed_needs_clear(conn, host, True, filename or "fertig")
 
         spool_warn = bool(prev.get("spool_warn"))
         if state == "printing" and not spool_warn:
@@ -160,8 +189,108 @@ class StateWatcher:
             "offline": False,
             "filename": filename,
             "spool_warn": spool_warn if state == "printing" else False,
+            "run_id": run_id or (prev.get("run_id") if state in ("printing", "paused") else None),
         }
 
+    def _track_print(self, conn, host, name, filename, live, state):
+        sent = store.latest_send(conn, host, filename) if filename else None
+        spool_id = (sent or {}).get("spool_id")
+        run = store.ensure_live_run(conn, host, name, filename, spool_id=spool_id)
+        objects = self._merge_objects(run.get("objects"), live.get("exclude"))
+        planned = usage.as_float(live.get("weight"))
+        total_mm = usage.as_float(live.get("filament_total"))
+        used_mm = usage.as_float(live.get("filament_used"))
+        progress = usage.as_float(live.get("progress"))
+        estimated = usage.as_float(live.get("estimated"))
+        store.update_run_progress(conn, run["id"], {
+            "state": "paused" if state == "paused" else "in_progress",
+            "progress_last": progress,
+            "filament_used_mm": used_mm,
+            "filament_total_mm": total_mm,
+            "weight_planned_g": planned,
+            "estimated_s": estimated,
+            "message": (live.get("message") or "") if state == "error" else "",
+            "objects": objects,
+            "duration_s": usage.as_float(live.get("elapsed")),
+        })
+        store.ensure_run_chargen(conn, run["id"])
+        self._maybe_sample(conn, run["id"], live, used_mm)
+        return store.get_run_row(conn, run["id"])
+
+    def _merge_objects(self, current, exclude):
+        known = {}
+        if isinstance(current, str):
+            try:
+                import json
+                current = json.loads(current)
+            except Exception:
+                current = []
+        for item in current or []:
+            if isinstance(item, dict) and item.get("name"):
+                known[item["name"]] = {
+                    "name": item["name"],
+                    "excluded": bool(item.get("excluded")),
+                }
+        exclude = exclude or {}
+        excluded = set(exclude.get("excluded") or [])
+        for item in exclude.get("objects") or []:
+            name = (item.get("name") if isinstance(item, dict) else str(item)).strip()
+            if not name:
+                continue
+            known[name] = {"name": name, "excluded": name in excluded}
+        for name in excluded:
+            if name not in known:
+                known[name] = {"name": name, "excluded": True}
+        return list(known.values())
+
+    def _maybe_sample(self, conn, run_id, live, used_mm):
+        now = time.monotonic()
+        last = self._last_sample.get(run_id, 0)
+        if now - last < SAMPLE_EVERY_S:
+            return
+        self._last_sample[run_id] = now
+        store.add_run_sample(conn, run_id, {
+            "sampled_at": datetime.now(timezone.utc),
+            "nozzle": live.get("nozzle"),
+            "nozzle_target": live.get("nozzle_target"),
+            "bed": live.get("bed"),
+            "bed_target": live.get("bed_target"),
+            "chamber": live.get("chamber"),
+            "fan": live.get("fan"),
+            "speed_factor": live.get("speed_factor"),
+            "extrude_factor": live.get("extrude_factor"),
+            "layer": live.get("layer") or 0,
+            "progress": live.get("progress"),
+            "filament_used_mm": used_mm,
+            "mmu_tool": live.get("mmu_tool"),
+        })
+
+    def _ensure_start_segment(self, conn, host, filename, live, run_id):
+        """Nur externe Einzelspule: ein Abschnitt. ACE-Farben ohne Wechsel → Anteil-Split."""
+        if not run_id:
+            return
+        existing = store.list_run_segments(conn, run_id)
+        if existing:
+            return
+        sent = store.latest_send(conn, host, filename) if filename else None
+        ace = (sent or {}).get("ace_map") or []
+        from grotti import acm
+
+        mapping = acm.normalize_mapping(ace) if ace else []
+        if mapping:
+            return
+        used_mm = usage.as_float(live.get("filament_used"))
+        rows = conn.execute(
+            """
+            SELECT id FROM spools
+            WHERE printer_host = %s AND ace_slot IS NULL
+            ORDER BY id LIMIT 1
+            """,
+            (host,),
+        ).fetchone()
+        if rows:
+            store.open_segment(conn, run_id, rows["id"], None, used_mm)
+
     def _cool_heaters(self, host):
         try:
             moonraker.heaters_off(host)
@@ -193,5 +322,8 @@ class StateWatcher:
         )
         return True
 
-    def _emit(self, conn, host, printer, kind, message, filename):
+    def _emit(self, conn, host, printer, kind, message, filename, run_id=None):
-        notify.record(conn, self.cfg, host, printer, kind, message, filename, dedupe_s=60)
+        notify.record(
+            conn, self.cfg, host, printer, kind, message, filename,
+            dedupe_s=60, run_id=run_id,
+        )

tests/test_ace_steer.py

@@ -0,0 +1,103 @@
+"""ACE-Trockner und Platz-Schreiben: Grenzen und Mapping."""
+
+import pytest
+
+from grotti.moonraker import (
+    PrinterError,
+    ace_hub_index,
+    extract_dryers,
+    spool_rgb,
+    steuern,
+)
+
+
+def test_extract_dryers_skips_dummy_unit():
+    status = {
+        "mmu_machine": {
+            "num_units": 1,
+            "unit_0": {
+                "num_gates": 4,
+                "dryer_status": "drying",
+                "dryer_temp": 44,
+                "dryer_target_temp": 45,
+                "dryer_remaining": 120,
+                "dryer_humidity": 20,
+            },
+            "unit_1": {
+                "num_gates": 0,
+                "dryer_status": "stop",
+            },
+        }
+    }
+    dryers = extract_dryers(status)
+    assert len(dryers) == 1
+    assert dryers[0]["id"] == 0
+    assert dryers[0]["status"] == "drying"
+    assert dryers[0]["target"] == 45
+    assert dryers[0]["remain"] == 120
+
+
+def test_extract_dryers_empty_without_machine():
+    assert extract_dryers({}) == []
+    assert extract_dryers({"mmu_machine": {}}) == []
+
+
+def test_ace_hub_index():
+    assert ace_hub_index(1) == (0, 0)
+    assert ace_hub_index(4) == (0, 3)
+    assert ace_hub_index(5) == (1, 0)
+    assert ace_hub_index(8) == (1, 3)
+    with pytest.raises(PrinterError):
+        ace_hub_index(0)
+    with pytest.raises(PrinterError):
+        ace_hub_index(9)
+
+
+def test_spool_rgb_from_colors():
+    assert spool_rgb({"colors": [{"name": "Blau", "hex": "#002B49"}]}) == {
+        "R": 0, "G": 43, "B": 73,
+    }
+    assert spool_rgb({"colors": [], "color": "Weiß"}) is None
+    assert spool_rgb({"color": "#ff00aa"}) == {"R": 255, "G": 0, "B": 170}
+
+
+def test_dryer_start_bounds(monkeypatch):
+    calls = []
+
+    def fake_post(host, path, payload, timeout=20):
+        calls.append((host, path, payload))
+        return {"result": "ok"}
+
+    monkeypatch.setattr("grotti.moonraker.post_json", fake_post)
+    steuern("10.10.1.60", "dryer_start", {"id": 0, "temp": 45, "duration": 240})
+    assert calls[0][1] == "/server/filament_hub/start_drying"
+    assert calls[0][2]["fan_speed"] == 0
+
+    with pytest.raises(PrinterError):
+        steuern("10.10.1.60", "dryer_start", {"id": 2, "temp": 45, "duration": 60})
+    with pytest.raises(PrinterError):
+        steuern("10.10.1.60", "dryer_start", {"id": 0, "temp": 20, "duration": 60})
+    with pytest.raises(PrinterError):
+        steuern("10.10.1.60", "dryer_start", {"id": 0, "temp": 45, "duration": 0})
+
+
+def test_slot_setzen_payload(monkeypatch):
+    calls = []
+
+    def fake_post(host, path, payload, timeout=20):
+        calls.append((host, path, payload))
+        return {"result": "ok"}
+
+    monkeypatch.setattr("grotti.moonraker.post_json", fake_post)
+    steuern(
+        "10.10.1.60",
+        "slot_setzen",
+        {"id": 0, "index": 2, "type": "PLA", "color": {"R": 1, "G": 2, "B": 3}},
+    )
+    assert calls[0][1] == "/printer/filament_hub/set_filament_info"
+    assert calls[0][2] == {
+        "id": 0,
+        "index": 2,
+        "type": "PLA",
+        "color": {"R": 1, "G": 2, "B": 3},
+    }

tests/test_moonraker_names.py

@@ -0,0 +1,25 @@
+"""ASCII-Dateinamen für Moonraker-Upload."""
+
+from grotti.moonraker import multipart, safe_upload_name
+
+
+def test_safe_upload_strips_cjk():
+    name = "1015-2159-虎钳式强力夹子_plate(01)_PLA_0.2_53m57s.gcode"
+    safe = safe_upload_name(name)
+    assert safe.isascii()
+    assert safe.endswith(".gcode")
+    assert "plate(01)" in safe
+    assert "虎" not in safe
+
+
+def test_multipart_single_ascii_filename():
+    name = "模型_test.gcode"
+    _boundary, body = multipart(name, b"G28\n")
+    head = body.split(b"G28\n", 1)[0].decode("ascii")
+    assert "filename*=UTF-8" not in head
+    assert 'filename="test.gcode"' in head
+    assert all(ord(ch) < 128 for ch in head)
+
+
+def test_safe_upload_preserves_path():
+    assert safe_upload_name("subdir/foo.gcode") == "subdir/foo.gcode"

tests/test_toolpath.py

@@ -0,0 +1,55 @@
+"""Toolpath-Thinning: ganze Schichten dicht, keine gesprenkelten Stichproben."""
+
+from grotti.toolpath import TOOLPATH_VERSION, _thin_points, build_toolpath
+
+
+def _fake_points(layers=40, per_layer=800):
+    points = []
+    breaks = []
+    seq = 0
+    for layer in range(layers):
+        z = 0.2 + layer * 0.2
+        breaks.append(len(points))
+        for i in range(per_layer):
+            extrude = 1 if i > 0 else 0
+            points.append([float(i), float(layer), z, extrude, seq])
+            seq += 1
+    return points, breaks
+
+
+def test_thin_keeps_consecutive_extrude_pairs():
+    points, breaks = _fake_points()
+    kept, new_breaks = _thin_points(points, breaks, max_points=8_000)
+    assert len(kept) <= 8_000
+    assert new_breaks
+    consec = 0
+    for i in range(1, len(kept)):
+        if kept[i][3] and kept[i][4] == kept[i - 1][4] + 1:
+            consec += 1
+    assert consec > 500, "Thinning darf keine zeichnbaren Segmente übrig lassen"
+
+
+def test_thin_keeps_solid_layers():
+    points, breaks = _fake_points(layers=50, per_layer=600)
+    kept, _ = _thin_points(points, breaks, max_points=10_000)
+    # Pro behaltener Z-Höhe: hoher Anteil aufeinanderfolgender Extrusionen
+    by_z = {}
+    for i in range(1, len(kept)):
+        if not (kept[i][3] and kept[i][4] == kept[i - 1][4] + 1):
+            continue
+        z = round(kept[i][2], 2)
+        by_z[z] = by_z.get(z, 0) + 1
+    assert by_z, "keine Extrusionssegmente"
+    assert max(by_z.values()) >= 40, "behaltene Schichten sollen dicht sein"
+
+
+def test_toolpath_version():
+    assert TOOLPATH_VERSION >= 8
+
+
+def test_build_empty(tmp_path):
+    path = tmp_path / "empty.gcode"
+    path.write_text("; nix\n", encoding="utf-8")
+    data = build_toolpath(path)
+    assert data["points"] == []
+    assert data["version"] == TOOLPATH_VERSION

tests/test_usage.py

@@ -0,0 +1,75 @@
+"""Ist-Gramm und Spulenanteile ohne Datenbank."""
+
+import unittest
+from pathlib import Path
+import sys
+
+ROOT = Path(__file__).resolve().parents[1]
+sys.path.insert(0, str(ROOT))
+
+from grotti import usage
+
+
+class ResolveUsedTests(unittest.TestCase):
+    def test_measured_from_mm(self):
+        grams, source = usage.resolve_used_grams(100, 500, 1000, 0, "cancelled", 60)
+        self.assertAlmostEqual(grams, 50)
+        self.assertEqual(source, "measured")
+
+    def test_abort_before_extrude(self):
+        grams, source = usage.resolve_used_grams(100, 0, 1000, 0, "cancelled", 5)
+        self.assertEqual(grams, 0)
+        self.assertEqual(source, "none")
+
+    def test_abort_progress_estimate(self):
+        grams, source = usage.resolve_used_grams(100, 0, 0, 0.25, "cancelled", 120)
+        self.assertAlmostEqual(grams, 25)
+        self.assertEqual(source, "estimate")
+
+    def test_completed_keeps_planned_without_mm(self):
+        grams, source = usage.resolve_used_grams(80, 0, 0, 1, "completed", 3600)
+        self.assertAlmostEqual(grams, 80)
+        self.assertEqual(source, "estimate")
+
+    def test_overshoot_no_cap(self):
+        grams, source = usage.resolve_used_grams(100, 1200, 1000, 1, "completed", 3600)
+        self.assertAlmostEqual(grams, 120)
+        self.assertEqual(source, "measured")
+
+
+class SplitTests(unittest.TestCase):
+    def test_single_is_measured(self):
+        parts, estimate = usage.split_used(50, [100], multi=False)
+        self.assertEqual(parts, [50])
+        self.assertFalse(estimate)
+
+    def test_multi_is_estimate(self):
+        parts, estimate = usage.split_used(90, [30, 60], multi=True)
+        self.assertAlmostEqual(parts[0], 30)
+        self.assertAlmostEqual(parts[1], 60)
+        self.assertTrue(estimate)
+
+
+class SegmentTests(unittest.TestCase):
+    def test_deltas(self):
+        segs = [
+            {"spool_id": 1, "ace_slot": None, "mm_start": 0, "mm_end": 400},
+            {"spool_id": 2, "ace_slot": None, "mm_start": 400, "mm_end": None},
+        ]
+        deltas = usage.segment_deltas(segs, 1000)
+        self.assertEqual(deltas[0], (1, None, 400))
+        self.assertEqual(deltas[1], (2, None, 600))
+
+    def test_grams_from_mm(self):
+        self.assertAlmostEqual(usage.grams_from_mm(250, 1000, 80), 20)
+
+
+class WeightListTests(unittest.TestCase):
+    def test_list_and_sum(self):
+        meta = {"filament_weight_total": [10, 20, 5]}
+        self.assertEqual(usage.weight_list(meta), [10, 20, 5])
+        self.assertEqual(usage.weight_sum(meta), 35)
+
+
+if __name__ == "__main__":
+    unittest.main()

web/app.py

@@ -37,7 +37,7 @@ IDEA_STATUS = {"offen", "spaeter", "erledigt"}
 PRINTER_FAMILIES = set(FAMILY_LABELS) | {""}
 STEER_ACTIONS = {
     "nozzle", "bed", "speed", "flow", "fan", "emergency_stop", "clear_error",
-    "exclude_object",
+    "exclude_object", "dryer_start", "dryer_stop", "slot_setzen",
 }
 
 
@@ -519,7 +519,15 @@ def create_app(cfg):
         return labels.get(name, name.replace("Anleitung-", "").replace("-", " "))
 
     def render_markdown(path):
+        """Markdown für die App: Git-relative Bild-/Kapitelpfade → App-URLs."""
         text = path.read_text(encoding="utf-8")
+        # docs/… → web/static/… im Repo; unter /doku als /static/…
+        text = text.replace("../web/static/", "/static/")
+        text = re.sub(
+            r"\]\((Anleitung-[A-Za-z0-9_-]+)(?:\.md)?\)",
+            r"](/doku/\1)",
+            text,
+        )
         html = markdown.markdown(text, extensions=["tables", "fenced_code", "sane_lists"])
         return Markup(html)
 
@@ -572,6 +580,58 @@ def create_app(cfg):
     def protokoll():
         return page("protokoll.html", "Protokoll")
 
+    @app.get("/protokoll/<int:run_id>")
+    def protokoll_detail(run_id):
+        row = store.get_run_row(conn(), run_id)
+        if not row:
+            abort(404)
+        return page("bericht.html", "Druckbericht")
+
+    @app.get("/statistik")
+    def statistik_page():
+        return page("statistik.html", "Statistik")
+
+    @app.get("/etikett/lauf/<int:run_id>")
+    def etikett_lauf(run_id):
+        row = store.get_run_row(conn(), run_id)
+        if not row:
+            abort(404)
+        run = store.run_out(row)
+        if not run.get("chargen_nr"):
+            store.ensure_run_chargen(conn(), run_id, run.get("weight_used_g"))
+            row = store.get_run_row(conn(), run_id)
+            run = store.run_out(row)
+        if not run.get("chargen_nr"):
+            abort(404)
+        labels = store.list_run_labels(conn(), run_id)
+        mode = (request.args.get("mode") or "druck").strip()
+        qty = max(1, min(50, int(request.args.get("qty") or 1)))
+        if mode == "objekt":
+            labels = store.ensure_run_labels(conn(), run_id, run.get("objects") or [], qty=qty)
+            sheets = [lab for lab in labels if not lab.get("excluded")]
+        else:
+            sheets = [{"object_name": "", "chargen_nr": run["chargen_nr"], "excluded": False}]
+        if not sheets:
+            abort(404)
+        spools = store.etikett_spools_for_run(conn(), run)
+        base = grotti_config.public_base(cfg, request.url_root)
+        target_g = float(run.get("weight_planned_g") or run.get("weight_g") or 0)
+        for sheet in sheets:
+            sheet["qr_url"] = "%s/protokoll/%s" % (base, run_id)
+            sheet["target_g"] = target_g
+            if sheet.get("object_name"):
+                sheet["qr_url"] += "#objekt-%s" % quote(sheet["object_name"])
+        return render_template(
+            "etikett_lauf.html",
+            page="etikett",
+            title="Etikett %s" % run["chargen_nr"],
+            token="",
+            run=run,
+            sheets=sheets,
+            spools=spools,
+            target_g=target_g,
+        )
+
     @app.get("/ideen")
     def ideen():
         return page("ideen.html", "Ideen")
@@ -664,6 +724,9 @@ def create_app(cfg):
             item["queue_failed"] = queue.get("failed")
             item["queue_waiting"] = queue.get("waiting", 0)
             item["queue_waiting_next"] = queue.get("waiting_next", "")
+            live_run = store.find_live_run(conn(), host) if host else None
+            item["live_run_id"] = (live_run or {}).get("id")
+            item["live_chargen"] = (live_run or {}).get("chargen_nr") or ""
 
         by_id = {row["host"]: row for row in rows}
         if request.args.get("live", "1") == "0":
@@ -865,7 +928,7 @@ def create_app(cfg):
         row = store.get_file_row(conn(), file_id)
         if not row:
             abort(404)
-        png = library.preview_png(row)
+        png = library.preview_png(row, conn=conn(), data_dir=cfg["data_dir"])
         if not png:
             abort(404)
         return png, 200, {"Content-Type": "image/png", "Cache-Control": "private, max-age=300"}
@@ -875,8 +938,8 @@ def create_app(cfg):
         row = store.get_file_row(conn(), file_id)
         if not row:
             raise GrottiError("Die Datei fehlt.", "datei", 404)
-        path = Path(row["stored_path"])
+        path = library.resolve_stored_path(conn(), row, cfg["data_dir"])
-        if not path.is_file():
+        if path is None or not path.is_file():
             raise GrottiError("Die Datei liegt nicht mehr auf der Platte.", "datei", 404)
         cache_dir = Path(cfg["data_dir"]) / "toolpath"
         cache_dir.mkdir(parents=True, exist_ok=True)
@@ -902,7 +965,10 @@ def create_app(cfg):
                 pass
         data["file_id"] = file_id
         data["name"] = row["name"]
-        return jsonify(data)
+        data["version"] = TOOLPATH_VERSION
+        resp = jsonify(data)
+        resp.headers["Cache-Control"] = "no-store"
+        return resp
 
     @app.patch("/api/v1/dateien/<int:file_id>")
     def file_patch(file_id):
@@ -1495,11 +1561,28 @@ def create_app(cfg):
 
     @app.get("/api/v1/spulen/by-code/<path:code>")
     def spool_by_code(code):
-        row = store.get_spool_by_code(conn(), code)
+        text = (code or "").strip()
+        if text.upper().startswith("D-"):
+            run = store.get_run_by_chargen(conn(), text)
+            if not run:
+                raise GrottiError("Kein Druck mit dieser Charge.", "charge", 404)
+            return jsonify({"kind": "lauf", "run": store.run_out(run), "redirect": "/protokoll/%s" % run["id"]})
+        row = store.get_spool_by_code(conn(), text)
         if not row:
             raise GrottiError("Keine Spule mit diesem Code.", "spule", 404)
         return jsonify(row)
 
+    @app.get("/api/v1/spulen/<int:spool_id>/akte")
+    def spool_akte(spool_id):
+        spool = store.get_spool_row(conn(), spool_id)
+        if not spool:
+            raise GrottiError("Die Spule fehlt.", "spule", 404)
+        return jsonify({
+            "spool": store.spool_out(spool),
+            "runs": store.list_spool_runs(conn(), spool_id),
+            "stats": store.spool_usage_stats(conn(), spool_id),
+        })
+
     @app.post("/api/v1/spulen")
     def spool_create():
         return jsonify(store.create_spool(conn(), spool_fields(body()))), 201
@@ -1520,6 +1603,18 @@ def create_app(cfg):
         spool = store.get_spool_row(conn(), spool_id)
         if not spool:
             raise GrottiError("Die Spule fehlt.", "spule", 404)
+        live_run = store.find_live_run(conn(), host)
+        mm_now = float((live_run or {}).get("filament_used_mm") or 0)
+        printing = bool(
+            live_run and (live_run.get("state") or "") in ("in_progress", "printing", "paused")
+        )
+        if printing:
+            try:
+                snap = moonraker.query(host)
+                if isinstance(snap.get("filament_used"), (int, float)):
+                    mm_now = float(snap["filament_used"])
+            except Exception:
+                pass
         # Alte Rolle am Platz / externe Rolle am Host freimachen
         if slot:
             old = conn().execute(
@@ -1531,22 +1626,32 @@ def create_app(cfg):
                 "SELECT * FROM spools WHERE printer_host = %s AND ace_slot IS NULL AND id <> %s",
                 (host, spool_id),
             ).fetchall()
+        printer = store.printer_by_host(conn(), host) or {}
+        if printing:
+            closed = store.close_open_segments(conn(), live_run["id"], slot, mm_now)
+            if not closed and old:
+                # Erster Wechsel: alter Abschnitt von 0 bis jetzt
+                for row in old:
+                    store.open_segment(conn(), live_run["id"], row["id"], slot, 0)
+                store.close_open_segments(conn(), live_run["id"], slot, mm_now)
         for row in old:
             store.update_spool(conn(), row["id"], {"printer_host": "", "ace_slot": None})
             store.add_event(
                 conn(),
                 host,
-                (store.printer_by_host(conn(), host) or {}).get("name") or host,
+                printer.get("name") or host,
                 "spule",
                 "%s: „%s“ ins Regal%s" % (
-                    (store.printer_by_host(conn(), host) or {}).get("name") or host,
+                    printer.get("name") or host,
                     row["name"],
                     (" (Platz %s)" % slot) if slot else "",
                 ),
-                "",
+                (live_run or {}).get("filename") or "",
+                run_id=(live_run or {}).get("id"),
             )
         updated = store.update_spool(conn(), spool_id, {"printer_host": host, "ace_slot": slot})
-        printer = store.printer_by_host(conn(), host) or {}
+        if printing:
+            store.open_segment(conn(), live_run["id"], spool_id, slot, mm_now)
         store.add_event(
             conn(),
             host,
@@ -1557,7 +1662,8 @@ def create_app(cfg):
                 updated["name"],
                 (" auf Platz %s" % slot) if slot else "",
             ),
-            "",
+            (live_run or {}).get("filename") or "",
+            run_id=(live_run or {}).get("id"),
         )
         return jsonify(updated)
 
@@ -1693,6 +1799,36 @@ def create_app(cfg):
     def run_list():
         return jsonify(store.list_runs(conn()))
 
+    @app.get("/api/v1/laeufe/<int:run_id>")
+    def run_get(run_id):
+        row = store.get_run_row(conn(), run_id)
+        if not row:
+            raise GrottiError("Der Lauf fehlt.", "lauf", 404)
+        run = store.run_out(row)
+        if not run.get("chargen_nr"):
+            store.ensure_run_chargen(conn(), run_id)
+            row = store.get_run_row(conn(), run_id) or row
+            run = store.run_out(row)
+        if run.get("chargen_nr") and run.get("objects"):
+            store.ensure_run_labels(conn(), run_id, run.get("objects") or [], qty=1)
+        file_row = store.get_file_row(conn(), run["file_id"]) if run.get("file_id") else None
+        project = store.get_project(conn(), run["project_id"]) if run.get("project_id") else None
+        samples = store.list_run_samples(conn(), run_id)
+        # Anzeige auf ca. 1 Punkt / Minute verdichten
+        if len(samples) > 180:
+            step = max(1, len(samples) // 120)
+            samples = samples[::step]
+        return jsonify({
+            "run": run,
+            "spools": store.list_run_spools(conn(), run_id),
+            "segments": store.list_run_segments(conn(), run_id),
+            "samples": samples,
+            "labels": store.list_run_labels(conn(), run_id),
+            "events": store.list_run_events(conn(), run_id),
+            "file": store.file_out(file_row) if file_row else None,
+            "project": project,
+        })
+
     @app.post("/api/v1/laeufe/abgleich")
     def run_sync():
         library.sync_watch(conn(), cfg, force=False)
@@ -1715,4 +1851,71 @@ def create_app(cfg):
             row = store.run_out(current)
         return jsonify(row)
 
+    @app.get("/api/v1/statistik")
+    def statistik_api():
+        since = request.args.get("since") or None
+        until = request.args.get("until") or None
+        host = (request.args.get("host") or "").strip()
+        material = (request.args.get("material") or "").strip()
+        brand = (request.args.get("brand") or "").strip()
+        project_id = optional_id(request.args.get("project_id"))
+        return jsonify(store.statistics(
+            conn(),
+            since=since,
+            until=until,
+            host=host,
+            material=material or "",
+            brand=brand or "",
+            project_id=project_id,
+        ))
+
+    @app.get("/api/v1/statistik.csv")
+    def statistik_csv():
+        import csv
+        import io
+        from flask import Response
+
+        since = request.args.get("since") or None
+        until = request.args.get("until") or None
+        host = (request.args.get("host") or "").strip()
+        material = (request.args.get("material") or "").strip()
+        brand = (request.args.get("brand") or "").strip()
+        runs = store.list_runs(
+            conn(),
+            limit=2000,
+            since=since,
+            until=until,
+            host=host,
+            material=material,
+            brand=brand,
+        )
+        buf = io.StringIO()
+        writer = csv.writer(buf, delimiter=";")
+        writer.writerow([
+            "id", "drucker", "datei", "zustand", "start", "ende", "dauer_s",
+            "soll_g", "ist_g", "quelle", "filament_eur", "strom_eur", "urteil", "charge",
+        ])
+        for run in runs:
+            writer.writerow([
+                run["id"],
+                run.get("printer_name") or "",
+                run.get("filename") or "",
+                run.get("state") or "",
+                run.get("started_at") or "",
+                run.get("ended_at") or "",
+                run.get("duration_s") or 0,
+                run.get("weight_planned_g") or 0,
+                run.get("weight_used_g") or 0,
+                run.get("weight_source") or "",
+                run.get("filament_cost") or 0,
+                run.get("energy_cost") or 0,
+                run.get("verdict") or "",
+                run.get("chargen_nr") or "",
+            ])
+        return Response(
+            buf.getvalue(),
+            mimetype="text/csv; charset=utf-8",
+            headers={"Content-Disposition": "attachment; filename=grotti-laeufe.csv"},
+        )
+
     return app

web/static/gcode-viewer.js

@@ -10,8 +10,8 @@ window.GrottiGcodeViewer = (function () {
   const COLOR_OBJ_EX = 0xef4444;
   const COLOR_OBJ_CUR = 0xfbbf24;
   const GRID_STEP = 10;
-  // Nur leichte Doppelung — starke Offsets + Punkte wirkten wie Vollkörper mit Löchern
+  // Keine Parallel-Offsets: bei ausgedünnten Pfaden wirkten sie gesprenkelt
-  const FAT_OFFSETS = [0, -0.22, 0.22];
+  const FAT_OFFSETS = [0];
 
   function create(canvas) {
     const wrap = document.createElement("div");

web/static/grotti.css

@@ -405,6 +405,36 @@ body.shelf [data-role="hero"] { font-size: 1.35rem; }
   padding: 0.25rem 0.35rem;
   font-size: 0.82rem;
 }
+.steer-ace,
+.steer-ace-slots {
+  display: grid;
+  gap: 0.35rem;
+  padding-top: 0.35rem;
+  border-top: 1px solid var(--line);
+}
+.steer-ace-head {
+  display: flex;
+  flex-wrap: wrap;
+  gap: 0.35rem 0.65rem;
+  align-items: baseline;
+  font-size: 0.78rem;
+}
+.steer-ace-head b { font-weight: 650; }
+.steer-slot-row {
+  display: flex;
+  flex-wrap: wrap;
+  gap: 0.35rem 0.55rem;
+  align-items: center;
+  font-size: 0.78rem;
+}
+.steer-slot-row .dot {
+  width: 0.85rem;
+  height: 0.85rem;
+  border-radius: 99px;
+  flex: none;
+  border: 1px solid rgba(255, 255, 255, 0.15);
+}
+.steer-slot-row .grow { min-width: 0; overflow-wrap: anywhere; }
 .queue-name { color: var(--ink); font-size: var(--t-sm); font-weight: 650; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; display: block; }
 .queue-msg { color: var(--muted); font-size: var(--t-xs); line-height: 1.3; overflow-wrap: anywhere; }
 .queue-sub { color: var(--faint); font-size: 0.66rem; font-variant-numeric: tabular-nums; flex: none; }
@@ -467,12 +497,16 @@ body.shelf [data-role="hero"] { font-size: 1.35rem; }
 .ace-printer-name { margin: 0; font-size: 0.82rem; font-weight: 650; color: var(--ink); }
 .ace-row {
   display: grid;
-  grid-template-columns: 0.85rem minmax(0, 1fr) minmax(7rem, 0.9fr);
+  grid-template-columns: 0.85rem minmax(0, 1fr) minmax(12rem, 1.4fr);
   gap: 0.45rem;
   align-items: center;
   margin: 0;
   font-size: 0.82rem;
 }
+.ace-row select {
+  min-width: 0;
+  width: 100%;
+}
 .ace-swatch {
   width: 0.85rem;
   height: 0.85rem;
@@ -514,6 +548,23 @@ h2 { font-size: 0.95rem; margin: 0 0 0.65rem; letter-spacing: -0.02em; font-weig
   border-radius: var(--radius-sm);
   min-height: var(--control-h);
 }
+.page-tools .date-field {
+  width: auto;
+  min-width: 9.5rem;
+  max-width: 11rem;
+  flex: 0 0 auto;
+}
+.page-tools .period-presets {
+  width: auto;
+  max-width: 100%;
+  flex: 1 1 100%;
+  grid-auto-columns: auto;
+  overflow-x: auto;
+}
+.page-tools .period-presets button {
+  padding: 0.4rem 0.55rem;
+  white-space: nowrap;
+}
 .lead, .tiny, .summary { color: var(--muted); }
 .summary { margin: 0.3rem 0 0; }
 .tiny { font-size: 0.8rem; margin: 0.2rem 0 0; line-height: 1.4; max-width: 52ch; }
@@ -620,12 +671,44 @@ article.machine.offline:hover { opacity: 1; }
 .job-line {
   display: flex;
   align-items: center;
-  gap: 0.45rem;
+  gap: 0.55rem;
   min-width: 0;
   color: var(--muted);
   font-size: var(--t-sm);
+  padding: 0.45rem 0.5rem;
+  border-radius: 10px;
+  background: rgba(255, 255, 255, 0.03);
+  border: 1px solid var(--line);
+}
+.job-thumb {
+  width: 4.5rem;
+  height: 4.5rem;
+  object-fit: contain;
+  border-radius: 9px;
+  border: 1px solid var(--line);
+  background: var(--card-2);
+  flex: none;
+}
+.job-thumb[hidden] { display: none; }
+.job-ico { display: inline-flex; flex: none; color: var(--faint); }
+.job-ico .ico { width: 1.1rem; height: 1.1rem; }
+.job-line.has-thumb .job-ico { display: none; }
+.job-meta {
+  min-width: 0;
+  flex: 1;
+  display: flex;
+  flex-direction: column;
+  gap: 0.3rem;
+  align-items: flex-start;
+}
+.job-line .name {
+  overflow: hidden;
+  text-overflow: ellipsis;
+  white-space: nowrap;
+  max-width: 100%;
+  color: var(--ink);
+  font-weight: 650;
 }
-.job-line .name { overflow: hidden; text-overflow: ellipsis; white-space: nowrap; flex: 1; min-width: 0; color: var(--ink); }
 .job-line .swatches { padding: 0; min-height: 0; flex: none; }
 .badge {
   font-size: 0.65rem;
@@ -1874,7 +1957,6 @@ body.desk-on main {
 .summary-text b { color: var(--ink); }
 .page-head-side { display: flex; align-items: center; gap: 0.75rem 1rem; flex-wrap: wrap; }
 .page-head-side .check { margin: 0; font-size: var(--t-sm); color: var(--muted); }
-.job-line > .ico { color: var(--faint); }
 .job-line[hidden] { display: none; }
 article.machine.flash { animation: flash 2s var(--ease); }
 @keyframes flash { 0%, 40% { box-shadow: 0 0 0 2px var(--accent), var(--shadow); } }
@@ -2274,3 +2356,70 @@ label.button:hover { background: rgba(255, 255, 255, 0.04); }
   .nav-secondary a { padding: 0.4rem; }
   .nav-main a.on { box-shadow: none; border-radius: 9px; padding-left: 0.55rem; }
 }
+
+/* Druckbericht & Statistik */
+.bericht { display: grid; gap: 0.85rem; }
+.bericht-head { display: grid; gap: 0.5rem; }
+.bericht-meta p { margin: 0.2rem 0; }
+.temp-chart {
+  width: 100%;
+  max-width: 40rem;
+  height: auto;
+  background: #0c0c10;
+  border-radius: 10px;
+  border: 1px solid var(--line);
+}
+.chart-label { fill: var(--muted); font-size: 11px; }
+.chart-legend { display: flex; gap: 0.75rem; flex-wrap: wrap; margin-top: 0.35rem; }
+.chart-legend .leg::before {
+  content: "";
+  display: inline-block;
+  width: 0.65rem;
+  height: 0.65rem;
+  border-radius: 50%;
+  margin-right: 0.3rem;
+  vertical-align: -0.05rem;
+}
+.chart-legend .nozzle::before { background: #ea580c; }
+.chart-legend .bed::before { background: #2563eb; }
+.chart-legend .chamber::before { background: #16a34a; }
+.tag {
+  display: inline-block;
+  font-size: 0.72rem;
+  font-weight: 650;
+  padding: 0.05rem 0.35rem;
+  border-radius: 6px;
+  background: var(--accent-soft);
+  color: var(--accent);
+}
+.kpi-row {
+  display: grid;
+  grid-template-columns: repeat(auto-fill, minmax(8.5rem, 1fr));
+  gap: 0.65rem;
+  margin-bottom: 0.85rem;
+}
+.kpi {
+  background: var(--card);
+  border: 1px solid var(--line);
+  border-radius: 12px;
+  padding: 0.7rem 0.8rem;
+}
+.kpi-val {
+  font-size: 1.25rem;
+  font-weight: 750;
+  letter-spacing: -0.02em;
+}
+.kpi-label { color: var(--muted); font-size: 0.78rem; font-weight: 650; }
+.spool-akte {
+  margin-top: 0.85rem;
+  padding-top: 0.7rem;
+  border-top: 1px solid var(--line);
+}
+.spool-akte h3 { margin: 0 0 0.35rem; font-size: 0.95rem; }
+ul.plain { list-style: none; margin: 0; padding: 0; }
+ul.plain li { padding: 0.2rem 0; border-bottom: 1px solid var(--line); }
+ul.plain li:last-child { border-bottom: 0; }
+.grid-2 { display: grid; gap: 0.85rem; }
+@media (min-width: 800px) {
+  .grid-2 { grid-template-columns: 1fr 1fr; }
+}

web/templates/bericht.html

@@ -0,0 +1,146 @@
+{% extends "layout.html" %}
+{% block body %}
+<div class="page-head">
+  <div>
+    <h1>Druckbericht</h1>
+    <p class="tiny" id="bericht-sub">Lauf wird geladen …</p>
+  </div>
+  <div class="page-head-side">
+    <a class="ghost" href="/protokoll">← Protokoll</a>
+    <a class="ghost" id="etikett-druck" href="#" hidden>Etikett Druck</a>
+    <a class="ghost" id="etikett-objekt" href="#" hidden>Etiketten Objekte</a>
+  </div>
+</div>
+<p id="bericht-note"></p>
+<div id="bericht" class="bericht"></div>
+{% endblock %}
+{% block script %}
+<script>
+const runId = Number(location.pathname.split("/").pop());
+const states = {
+  completed: "fertig", cancelled: "abgebrochen", error: "Fehler",
+  in_progress: "druckt", printing: "druckt", paused: "pausiert", interrupted: "unterbrochen",
+};
+
+function sourceLabel(source, estimate) {
+  if (estimate) return "Schätzwert";
+  if (source === "measured") return "Messwert";
+  if (source === "estimate") return "Schätzwert";
+  return source || "";
+}
+
+function chart(samples) {
+  if (!samples || samples.length < 2) {
+    return '<p class="tiny">Kein Temperaturverlauf (nur für neue Drucke).</p>';
+  }
+  const w = 640, h = 180, pad = 28;
+  const temps = samples.flatMap((s) => [s.nozzle, s.bed, s.chamber, s.nozzle_target, s.bed_target].filter((v) => v != null));
+  const minT = Math.min(...temps, 0);
+  const maxT = Math.max(...temps, 100);
+  const x = (i) => pad + (i / (samples.length - 1)) * (w - pad * 2);
+  const y = (v) => h - pad - ((Number(v) - minT) / Math.max(1, maxT - minT)) * (h - pad * 2);
+  function path(key, color) {
+    const pts = samples.map((s, i) => s[key] == null ? null : `${x(i)},${y(s[key])}`).filter(Boolean);
+    if (pts.length < 2) return "";
+    return `<polyline fill="none" stroke="${color}" stroke-width="1.6" points="${pts.join(" ")}" />`;
+  }
+  return `<svg class="temp-chart" viewBox="0 0 ${w} ${h}" role="img" aria-label="Temperaturverlauf">
+    ${path("nozzle_target", "#fdba74")}
+    ${path("bed_target", "#93c5fd")}
+    ${path("nozzle", "#ea580c")}
+    ${path("bed", "#2563eb")}
+    ${path("chamber", "#16a34a")}
+    <text x="${pad}" y="14" class="chart-label">${Math.round(maxT)} °C</text>
+    <text x="${pad}" y="${h - 8}" class="chart-label">${Math.round(minT)} °C</text>
+  </svg>
+  <p class="tiny chart-legend"><span class="leg nozzle">Düse</span> <span class="leg bed">Bett</span> <span class="leg chamber">Kammer</span> · gestrichelt ≈ Soll</p>`;
+}
+
+function render(data) {
+  const run = data.run;
+  const name = (run.filename || "").split("/").pop() || "ohne Datei";
+  document.getElementById("bericht-sub").textContent =
+    (run.printer_name || run.printer_host) + " · " + name
+    + (run.chargen_nr ? " · " + run.chargen_nr : "");
+
+  const planned = Number(run.weight_planned_g) || 0;
+  const used = Number(run.weight_used_g) || 0;
+  const diff = Math.round(used) - Math.round(planned);
+  const cost = Number(run.filament_cost || 0) + Number(run.energy_cost || 0);
+
+  const spoolRows = (data.spools || []).map((s) => `
+    <tr>
+      <td>${escapeHtml(s.name)}${s.ace_slot ? " · ACE " + s.ace_slot : ""}</td>
+      <td>${escapeHtml(s.material_type || "")}</td>
+      <td class="num">${grams(s.weight_planned_g)}</td>
+      <td class="num">${grams(s.weight_g)}${s.is_estimate ? ' <span class="tag">Schätzwert</span>' : ""}</td>
+      <td class="num">${euro(s.cost)}</td>
+      <td class="nowrap">${escapeHtml(s.chargen_nr || "")}</td>
+    </tr>`).join("") || '<tr><td class="empty" colspan="6">Keine Spule zugeordnet.</td></tr>';
+
+  const events = (data.events || []).map((e) =>
+    `<li><span class="tiny">${escapeHtml((e.created_at || "").replace("T", " ").slice(0, 19))}</span> ${escapeHtml(e.message || e.kind)}</li>`
+  ).join("") || "<li class=\"tiny\">Keine Ereignisse.</li>";
+
+  const labels = (data.labels || []).filter((l) => !l.excluded);
+  const labelBits = labels.length
+    ? labels.map((l) => `<li id="objekt-${encodeURIComponent(l.object_name || "")}"><code>${escapeHtml(l.chargen_nr)}</code> ${escapeHtml(l.object_name || "Druck")}</li>`).join("")
+    : (run.chargen_nr ? `<li><code>${escapeHtml(run.chargen_nr)}</code> gesamter Druck</li>` : "<li class=\"tiny\">Noch keine Charge.</li>");
+
+  const segments = (data.segments || []).map((s) => {
+    const end = s.mm_end == null ? "…" : Math.round(s.mm_end);
+    return `<li>${escapeHtml(s.spool_name)} · ${Math.round(s.mm_start)}–${end} mm${s.ace_slot ? " · Platz " + s.ace_slot : ""}</li>`;
+  }).join("");
+
+  document.getElementById("bericht").innerHTML = `
+    <div class="card bericht-head">
+      <div class="bericht-meta">
+        <p><b>${escapeHtml(states[run.state] || run.state)}</b>${run.verdict ? " · Urteil " + escapeHtml(run.verdict) : ""}</p>
+        <p class="tiny">${escapeHtml(run.started_at || "—")} → ${escapeHtml(run.ended_at || "—")}</p>
+        <p>Dauer <b>${hours(run.duration_s)}</b>${run.estimated_s ? " · Soll " + hours(run.estimated_s) : ""}</p>
+        <p>Material <b>${grams(used)}</b> von ${grams(planned)}${planned ? " (" + (diff > 0 ? "+" : "") + diff + " g)" : ""}
+          ${run.weight_source ? ' · <span class="tag">' + sourceLabel(run.weight_source) + "</span>" : ""}</p>
+        <p>Kosten <b>${euro(cost)}</b> (Filament ${euro(run.filament_cost)} · Strom ${euro(run.energy_cost)})</p>
+        ${run.message ? "<p class=\"msg\">" + escapeHtml(run.message) + "</p>" : ""}
+        ${data.project ? "<p class=\"tiny\">Projekt: " + escapeHtml(data.project.name) + "</p>" : ""}
+      </div>
+    </div>
+    <div class="card">
+      <h2>Spulen</h2>
+      <div class="table-wrap"><table>
+        <thead><tr><th>Spule</th><th>Sorte</th><th>Soll</th><th>Ist</th><th>Kosten</th><th>Charge</th></tr></thead>
+        <tbody>${spoolRows}</tbody>
+      </table></div>
+      ${segments ? "<h3>Abschnitte</h3><ul class=\"plain\">" + segments + "</ul>" : ""}
+    </div>
+    <div class="card">
+      <h2>Verlauf</h2>
+      ${chart(data.samples)}
+    </div>
+    <div class="card grid-2">
+      <div>
+        <h2>Chargen</h2>
+        <ul class="plain">${labelBits}</ul>
+      </div>
+      <div>
+        <h2>Ereignisse</h2>
+        <ul class="plain">${events}</ul>
+      </div>
+    </div>`;
+
+  const druck = document.getElementById("etikett-druck");
+  const objekt = document.getElementById("etikett-objekt");
+  if (run.chargen_nr) {
+    druck.hidden = false;
+    druck.href = "/etikett/lauf/" + run.id + "?mode=druck";
+    objekt.hidden = false;
+    objekt.href = "/etikett/lauf/" + run.id + "?mode=objekt&qty=1";
+  } else {
+    druck.hidden = true;
+    objekt.hidden = true;
+  }
+}
+
+api("/laeufe/" + runId).then(render).catch((error) => showNote("bericht-note", error));
+</script>
+{% endblock %}

web/templates/dateien.html

@@ -103,7 +103,7 @@
         <select id="send-project"><option value="">keins</option></select>
         <div id="ace-box" class="ace-box" hidden>
           <h3>ACE-Zuordnung <span class="tip" title="Datei-Farbe auf ACE-Platz. Ohne Zuordnung startet der ACE oft nicht."><svg class="ico"><use href="#i-info"/></svg></span></h3>
-          <p class="tiny msg" id="ace-trailer-warn" hidden>Für Auto-Feed fehlen Slicer-Metadaten in der Datei.</p>
+          <p class="tiny" id="ace-trailer-warn" hidden>Mehrfarb ohne Slicer-Trailer — Grotti ergänzt `; referenced_tools` beim Senden.</p>
           <div id="ace-maps"></div>
         </div>
       </div>
@@ -146,7 +146,7 @@
 {% endblock %}
 {% block script %}
 <script src="{{ url_for('static', filename='three.min.js') }}?v=1"></script>
-<script src="{{ url_for('static', filename='gcode-viewer.js') }}?v=8"></script>
+<script src="{{ url_for('static', filename='gcode-viewer.js') }}?v=10"></script>
 <script src="{{ url_for('static', filename='sweep-viewer.js') }}?v=1"></script>
 <script>
 const families = { kobra_s1: "Kobra S1", kobra_3: "Kobra 3" };
@@ -198,7 +198,7 @@ async function showToolpath(file, progress) {
   if (viewerFileId !== file.id) {
     meta.textContent = "Pfad wird gelesen …";
     try {
-      const data = await api("/dateien/" + file.id + "/pfad");
+      const data = await api("/dateien/" + file.id + "/pfad?tp=8");
       viewer.setPath(data);
       viewerFileId = file.id;
       meta.textContent = (data.count || 0).toLocaleString("de-DE") + " Punkte";
@@ -252,13 +252,41 @@ function loadSendMemory() {
 
 /* ---------- ACE / Spule ---------- */
 
-function slotLabel(slot) {
+function spoolAtSlot(host, place) {
+  return spoolsOnHost(host).find((s) => Number(s.ace_slot) === Number(place)) || null;
+}
+
+function slotLabel(host, slot) {
   const place = Number(slot.index) + 1;
   const box = place <= 4 ? "ACE 1 · " + place : "ACE 2 · " + (place - 4);
+  const spool = spoolAtSlot(host, place);
+  if (spool) {
+    const bits = [box];
+    const kind = spool.material_type || slot.type || "";
+    if (kind) bits.push(kind);
+    if (spool.color) bits.push(spool.color);
+    if (spool.name) bits.push(spool.name);
+    bits.push(grams(spool.remaining_g));
+    return bits.join(" · ");
+  }
   const kind = slot.type ? " · " + slot.type : "";
   return box + kind;
 }
 
+function slotTitle(host, slot) {
+  const place = Number(slot.index) + 1;
+  const spool = spoolAtSlot(host, place);
+  if (!spool) return slot.type ? String(slot.type) : "";
+  const bits = [];
+  if (spool.brand) bits.push(spool.brand);
+  if (spool.name) bits.push(spool.name);
+  if (spool.material_type) bits.push(spool.material_type);
+  if (spool.color) bits.push(spool.color);
+  bits.push(grams(spool.remaining_g) + " Rest");
+  if (spool.chargen_nr) bits.push(spool.chargen_nr);
+  return bits.join(" · ");
+}
+
 function filamentLabel(filament, index) {
   const kind = filament.type || "Filament";
   const color = filament.color ? " · " + filament.color : "";
@@ -369,7 +397,10 @@ function renderAceMaps(force) {
   const paints = filePaints(file);
   box.hidden = false;
   document.getElementById("options").open = true;
-  if (trailerWarn) trailerWarn.hidden = !!file.ace_trailer;
+  // Mono: Trailer fehlt oft und ist kein Fehler — Grotti setzt ihn beim Senden mit ACE-Map.
+  if (trailerWarn) {
+    trailerWarn.hidden = !!file.ace_trailer || paints.length <= 1;
+  }
   root.innerHTML = "";
   chosen.forEach((printer) => {
     const block = document.createElement("div");
@@ -393,10 +424,15 @@ function renderAceMaps(force) {
       printer.slots.forEach((slot) => {
         const option = document.createElement("option");
         option.value = String(slot.index);
-        option.textContent = slotLabel(slot);
+        option.textContent = slotLabel(printer.host, slot);
-        if (slot.color) option.style.borderLeft = "4px solid " + slot.color;
+        option.title = slotTitle(printer.host, slot);
-        // einfache Vorauswahl: gleiche Sorte, sonst Platz in Reihenfolge
+        const spool = spoolAtSlot(printer.host, Number(slot.index) + 1);
-        if (!select.dataset.picked && filament.type && slot.type && filament.type.toLowerCase() === String(slot.type).toLowerCase()) {
+        const hex = (spool && spool.colors && spool.colors[0] && spool.colors[0].hex) || slot.color || "";
+        if (hex) option.style.borderLeft = "4px solid " + hex;
+        const spoolType = (spool && spool.material_type) || slot.type || "";
+        // Vorauswahl: gleiche Sorte (Grotti-Spule bevorzugt), sonst Platz in Reihenfolge
+        if (!select.dataset.picked && filament.type && spoolType
+            && filament.type.toLowerCase() === String(spoolType).toLowerCase()) {
           option.selected = true;
           select.dataset.picked = "1";
         }

web/templates/etikett.html

@@ -41,14 +41,17 @@
     border: 1px solid #ccc;
     border-radius: 4px;
     display: grid;
-    grid-template-columns: 1fr 22mm;
+    grid-template-columns: 1fr 20mm;
-    gap: 3mm;
+    gap: 2.5mm;
     align-items: center;
+    overflow: hidden;
   }
+  .meta { min-width: 0; }
   .meta h1 {
     margin: 0 0 2mm;
     font-size: 4.2mm;
     letter-spacing: -0.02em;
+    overflow-wrap: anywhere;
   }
   .meta p { margin: 0 0 1.2mm; font-size: 3.1mm; color: #333; }
   .meta .code { font-weight: 700; font-variant-numeric: tabular-nums; }
@@ -61,7 +64,19 @@
     margin-left: -1mm;
   }
   .dot:first-child { margin-left: 0; }
-  #qr { width: 20mm; height: 20mm; }
+  .qr-wrap {
+    width: 20mm;
+    height: 20mm;
+    overflow: hidden;
+    flex-shrink: 0;
+  }
+  .qr-wrap canvas {
+    display: block;
+    width: 20mm !important;
+    height: 20mm !important;
+    max-width: 100%;
+    max-height: 100%;
+  }
   @media print {
     body { background: #fff; }
     .toolbar { display: none; }
@@ -99,14 +114,20 @@
     <p>Hersteller: {{ spool.hersteller_charge }}</p>
     {% endif %}
   </div>
-  <canvas id="qr" width="120" height="120"></canvas>
+  <div class="qr-wrap">
+    <canvas id="qr" width="80" height="80"></canvas>
+  </div>
 </div>
 <script src="{{ url_for('static', filename='qrcode.min.js') }}?v=1"></script>
 <script>
 QRCode.toCanvas(document.getElementById("qr"), {{ qr_url|tojson }}, {
-  width: 120,
+  width: 80,
   margin: 1,
   color: { dark: "#111111", light: "#ffffff" }
+}, () => {
+  const node = document.getElementById("qr");
+  node.style.width = "20mm";
+  node.style.height = "20mm";
 });
 </script>
 </body>

web/templates/etikett_lauf.html

@@ -0,0 +1,126 @@
+<!DOCTYPE html>
+<html lang="de">
+<head>
+<meta charset="utf-8">
+<meta name="viewport" content="width=device-width, initial-scale=1">
+<title>{{ title }}</title>
+<style>
+  :root { color-scheme: light; }
+  * { box-sizing: border-box; }
+  body {
+    margin: 0;
+    font: 14px/1.35 "Segoe UI", system-ui, sans-serif;
+    color: #111;
+    background: #f3f3f3;
+  }
+  .toolbar {
+    display: flex;
+    gap: 0.6rem;
+    padding: 0.8rem 1rem;
+    background: #1a1a1a;
+    color: #eee;
+  }
+  .toolbar a, .toolbar button {
+    color: #111;
+    background: #f97316;
+    border: 0;
+    border-radius: 8px;
+    padding: 0.4rem 0.85rem;
+    font: inherit;
+    font-weight: 650;
+    text-decoration: none;
+    cursor: pointer;
+  }
+  .toolbar a.ghost { background: transparent; color: #eee; border: 1px solid #555; }
+  .sheet {
+    width: 70mm;
+    min-height: 40mm;
+    margin: 1.2rem auto;
+    padding: 3.5mm;
+    background: #fff;
+    border: 1px solid #ccc;
+    border-radius: 4px;
+    display: grid;
+    grid-template-columns: 1fr 20mm;
+    gap: 2.5mm;
+    align-items: center;
+    overflow: hidden;
+    page-break-after: always;
+  }
+  .sheet:last-child { page-break-after: auto; }
+  .meta { min-width: 0; }
+  .meta h1 {
+    margin: 0 0 2mm;
+    font-size: 4.2mm;
+    letter-spacing: -0.02em;
+    overflow-wrap: anywhere;
+  }
+  .meta p { margin: 0 0 1.2mm; font-size: 3.1mm; color: #333; }
+  .meta .code { font-weight: 700; font-variant-numeric: tabular-nums; }
+  .qr-wrap {
+    width: 20mm;
+    height: 20mm;
+    overflow: hidden;
+    flex-shrink: 0;
+  }
+  .qr-wrap canvas,
+  .qr-wrap img {
+    display: block;
+    width: 20mm !important;
+    height: 20mm !important;
+    max-width: 100%;
+    max-height: 100%;
+  }
+  @media print {
+    body { background: #fff; }
+    .toolbar { display: none; }
+    .sheet {
+      margin: 0;
+      border: 0;
+      border-radius: 0;
+      page-break-inside: avoid;
+    }
+  }
+</style>
+</head>
+<body>
+<div class="toolbar">
+  <button type="button" onclick="window.print()">Drucken</button>
+  <a class="ghost" href="/protokoll/{{ run.id }}">Zurück</a>
+</div>
+{% for sheet in sheets %}
+<div class="sheet">
+  <div class="meta">
+    <h1>{{ sheet.object_name or (run.filename.split('/')[-1] if run.filename else 'Druck') }}</h1>
+    <p class="code">{{ sheet.chargen_nr }}</p>
+    {% set soll = sheet.target_g if sheet.target_g is defined else target_g %}
+    {% if soll %}
+    <p>Ziel {{ '%.0f'|format(soll) }} g</p>
+    {% endif %}
+    <p>{{ run.printer_name }} · {{ (run.ended_at or run.started_at or '')[:10] }}</p>
+    {% for spool in spools %}
+    <p>{% if spool.material_type %}{{ spool.material_type }}{% endif %}{% if spool.brand %} · {{ spool.brand }}{% endif %}{% if spool.name %} · {{ spool.name }}{% endif %}{% if spool.chargen_nr %} · {{ spool.chargen_nr }}{% endif %}{% if spool.hersteller_charge %} · H: {{ spool.hersteller_charge }}{% endif %}</p>
+    {% else %}
+    <p class="code" style="font-weight:500;color:#666">kein Material zugeordnet</p>
+    {% endfor %}
+  </div>
+  <div class="qr-wrap">
+    <canvas class="qr" id="qr-{{ loop.index0 }}" width="80" height="80" data-url="{{ sheet.qr_url }}"></canvas>
+  </div>
+</div>
+{% endfor %}
+<script src="{{ url_for('static', filename='qrcode.min.js') }}?v=1"></script>
+<script>
+document.querySelectorAll("canvas.qr").forEach((node) => {
+  QRCode.toCanvas(node, node.dataset.url, {
+    width: 80,
+    margin: 1,
+    color: { dark: "#111111", light: "#ffffff" }
+  }, () => {
+    node.style.width = "20mm";
+    node.style.height = "20mm";
+  });
+});
+</script>
+</body>
+</html>

web/templates/layout.html

@@ -9,7 +9,7 @@
 <link rel="icon" type="image/png" sizes="32x32" href="{{ url_for('static', filename='brand/favicon-32.png') }}">
 <link rel="icon" type="image/png" sizes="512x512" href="{{ url_for('static', filename='brand/favicon.png') }}">
 <link rel="apple-touch-icon" href="{{ url_for('static', filename='brand/apple-touch-icon.png') }}">
-<link rel="stylesheet" href="{{ url_for('static', filename='grotti.css') }}?v=39">
+<link rel="stylesheet" href="{{ url_for('static', filename='grotti.css') }}?v=45">
 <script>
 (function () {
   try {
@@ -100,7 +100,8 @@
     <a href="/kameras" class="{{ 'on' if page == 'kameras' else '' }}" title="Kameras"><svg class="ico"><use href="#i-camera"/></svg><span>Kameras</span></a>
     <a href="/aktivitaet" class="{{ 'on' if page == 'aktivitaet' else '' }} nav-desk" title="Aktivität"><svg class="ico"><use href="#i-activity"/></svg><span>Aktivität</span></a>
     <a href="/warteschlange" class="{{ 'on' if page == 'warteschlange' else '' }}" title="Warteschlange"><svg class="ico"><use href="#i-queue"/></svg><span>Warteschlange</span></a>
-    <a href="/protokoll" class="{{ 'on' if page == 'protokoll' else '' }} nav-desk" title="Protokoll"><svg class="ico"><use href="#i-list"/></svg><span>Protokoll</span></a>
+    <a href="/protokoll" class="{{ 'on' if page == 'protokoll' or page == 'bericht' else '' }} nav-desk" title="Protokoll"><svg class="ico"><use href="#i-list"/></svg><span>Protokoll</span></a>
+    <a href="/statistik" class="{{ 'on' if page == 'statistik' else '' }} nav-desk" title="Statistik"><svg class="ico"><use href="#i-activity"/></svg><span>Statistik</span></a>
     <a href="/material" class="{{ 'on' if page == 'material' else '' }} nav-desk" title="Material"><svg class="ico"><use href="#i-spool"/></svg><span>Material</span></a>
     <a href="/projekte" class="{{ 'on' if page == 'projekte' else '' }} nav-desk" title="Projekte"><svg class="ico"><use href="#i-folder"/></svg><span>Projekte</span></a>
   </nav>
@@ -289,6 +290,31 @@ function directItemHtml(p) {
 }
 
 let queueCache = [];
+const lastLiveFilename = Object.create(null);
+
+function setListHtml(el, html) {
+  if (!el) return;
+  if (el._html === html) return;
+  el._html = html;
+  el.innerHTML = html;
+}
+
+function stickyLiveFilename(host, filename, state) {
+  const next = filename || "";
+  if (next) {
+    lastLiveFilename[host] = next;
+    return next;
+  }
+  const prev = lastLiveFilename[host] || "";
+  if (prev && ["printing", "paused", "heating", "complete"].includes(String(state || "").toLowerCase())) {
+    return prev;
+  }
+  if (!["printing", "paused", "heating"].includes(String(state || "").toLowerCase())) {
+    delete lastLiveFilename[host];
+  }
+  return prev && ["complete"].includes(String(state || "").toLowerCase()) ? prev : "";
+}
+
 async function refreshPrintQueue() {
   let jobs;
   let active = [];
@@ -298,7 +324,10 @@ async function refreshPrintQueue() {
   queueCache = jobs || [];
   const running = queueCache.filter((job) => job.status === "running");
   const queuedHosts = new Set(running.map((job) => job.host));
-  const direct = (active || []).filter((p) => !queuedHosts.has(p.host));
+  const direct = (active || []).filter((p) => !queuedHosts.has(p.host)).map((p) => ({
+    ...p,
+    filename: stickyLiveFilename(p.host, p.filename, p.state),
+  }));
   const waiting = queueCache.filter((job) => job.status === "waiting");
   const errors = queueCache
     .filter((job) => job.status === "error")
@@ -308,15 +337,21 @@ async function refreshPrintQueue() {
   const runBox = document.getElementById("run-box");
   runBox.hidden = !(running.length || direct.length);
   document.getElementById("run-count").textContent = running.length + direct.length;
-  document.getElementById("run-list").innerHTML = running.map(runItemHtml).join("") + direct.map(directItemHtml).join("");
+  setListHtml(
+    document.getElementById("run-list"),
+    running.map(runItemHtml).join("") + direct.map(directItemHtml).join(""),
+  );
 
   const waitList = document.getElementById("wait-list");
   document.getElementById("wait-count").textContent = waiting.length;
   document.getElementById("wait-count").className = "count" + (errors.length ? " bad" : waiting.length ? " hot" : "");
   document.getElementById("wait-empty").hidden = !!(waiting.length || errors.length);
   document.getElementById("wait-box").classList.toggle("is-empty", !(waiting.length || errors.length));
-  waitList.innerHTML = errors.map((job) => waitItemHtml(job, 0, 1)).join("")
+  setListHtml(
-    + waiting.map((job, i) => waitItemHtml(job, i, waiting.length)).join("");
+    waitList,
+    errors.map((job) => waitItemHtml(job, 0, 1)).join("")
+      + waiting.map((job, i) => waitItemHtml(job, i, waiting.length)).join(""),
+  );
 
   const panel = document.getElementById("live-panel");
   panel.querySelectorAll("[data-cancel-q]").forEach((btn) => {

web/templates/material.html

@@ -120,6 +120,11 @@
           <button type="button" class="warn" id="spool-delete" hidden><svg class="ico"><use href="#i-trash"/></svg>Löschen</button>
         </div>
       </form>
+      <div id="spool-akte" class="spool-akte" hidden>
+        <h3>Akte</h3>
+        <p class="tiny" id="akte-summary"></p>
+        <ul class="plain" id="akte-runs"></ul>
+      </div>
       <p id="spool-note"></p>
     </section>
   </div>
@@ -424,6 +429,49 @@ function payload() {
   };
 }
 
+async function loadAkte(spoolId) {
+  const box = document.getElementById("spool-akte");
+  if (!spoolId) {
+    box.hidden = true;
+    return;
+  }
+  try {
+    const data = await api("/spulen/" + spoolId + "/akte");
+    const stats = data.stats || {};
+    const fillPct = Math.round(Number(stats.fill_pct) || 0);
+    let leer = "—";
+    if (stats.empty_in_days == null) leer = "kein Verbrauch";
+    else if (stats.empty_in_days <= 0) leer = "leer";
+    else leer = "noch ~" + Math.round(stats.empty_in_days) + " Tage";
+    document.getElementById("akte-summary").textContent =
+      "Verdruckt " + grams(stats.total_g)
+      + " · Ausschuss " + grams(stats.scrap_g)
+      + " · " + euro(stats.total_cost)
+      + " · Füllstand " + fillPct + " % · Leer-in: " + leer;
+    const list = document.getElementById("akte-runs");
+    list.innerHTML = "";
+    (data.runs || []).slice(0, 12).forEach((run) => {
+      const li = document.createElement("li");
+      const a = document.createElement("a");
+      a.href = "/protokoll/" + run.id;
+      a.textContent = (run.filename || "").split("/").pop() || ("#" + run.id);
+      li.appendChild(a);
+      li.appendChild(document.createTextNode(
+        " · " + grams(run.spool_weight_g)
+        + (run.spool_is_estimate ? " ≈" : "")
+        + " · " + (run.verdict || run.state || "")
+      ));
+      list.appendChild(li);
+    });
+    if (!(data.runs || []).length) {
+      list.innerHTML = '<li class="tiny">Noch kein Druck auf dieser Spule.</li>';
+    }
+    box.hidden = false;
+  } catch (error) {
+    box.hidden = true;
+  }
+}
+
 function fill(spool) {
   openSpoolPanel();
   document.getElementById("spool-id").value = spool ? spool.id : "";
@@ -451,6 +499,7 @@ function fill(spool) {
   showHint();
   renderPalette();
   renderSpools();
+  loadAkte(spool ? spool.id : null);
   document.getElementById("spool-panel").scrollIntoView({ block: "nearest", behavior: "smooth" });
 }
 
@@ -580,6 +629,7 @@ function renderSpools() {
     const rest = Number(spool.remaining_g) || 0;
     tr.children[5].textContent = grams(rest);
     if (rest < 100) tr.children[5].classList.add("msg");
+    if (rest < 0) tr.children[5].title = "Überzogen — Rest korrigieren";
     tr.addEventListener("click", () => fill(spool));
     body.appendChild(tr);
   });
@@ -806,7 +856,14 @@ async function openByCode(raw) {
       const match = code.match(/[?&]spool=(\d+)/);
       if (match) spool = spools.find((row) => String(row.id) === match[1]) || null;
     }
-    if (!spool) spool = await api("/spulen/by-code/" + encodeURIComponent(code));
+    if (!spool) {
+      const found = await api("/spulen/by-code/" + encodeURIComponent(code));
+      if (found && found.kind === "lauf" && found.redirect) {
+        location.href = found.redirect;
+        return;
+      }
+      spool = found;
+    }
     setView("spools");
     fill(spool);
     setScanNote("Spule " + (spool.chargen_nr || spool.name) + " geöffnet.", true);

web/templates/protokoll.html

@@ -24,7 +24,7 @@
 <p id="run-note"></p>
 <div class="card table-wrap">
   <table>
-    <thead><tr><th>Drucker</th><th>Datei</th><th>Zustand</th><th>Dauer</th><th>Gramm</th><th>Kosten</th><th>Urteil</th><th>Spule</th><th></th></tr></thead>
+    <thead><tr><th>Drucker</th><th>Datei</th><th>Zustand</th><th>Dauer</th><th>Ist</th><th>Kosten</th><th>Urteil</th><th>Spule</th><th></th></tr></thead>
     <tbody id="run-rows"></tbody>
   </table>
 </div>
@@ -80,12 +80,31 @@ function render() {
   }
   shown.forEach((run) => {
     const tr = document.createElement("tr");
+    tr.className = "pick";
     tr.innerHTML = "<td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td>";
     tr.children[0].textContent = run.printer_name;
-    tr.children[1].textContent = (run.filename || "").split("/").pop();
+    const fileCell = tr.children[1];
+    const link = document.createElement("a");
+    link.href = "/protokoll/" + run.id;
+    link.textContent = (run.filename || "").split("/").pop() || ("#" + run.id);
+    fileCell.appendChild(link);
+    if (run.chargen_nr) {
+      const code = document.createElement("div");
+      code.className = "tiny";
+      code.textContent = run.chargen_nr;
+      fileCell.appendChild(code);
+    }
     tr.children[2].textContent = states[run.state] || run.state;
     tr.children[3].textContent = hours(run.duration_s);
-    tr.children[4].textContent = run.weight_g ? grams(run.weight_g) : "";
+    const used = Number(run.weight_used_g) || Number(run.weight_g) || 0;
+    const planned = Number(run.weight_planned_g) || Number(run.weight_g) || 0;
+    tr.children[4].textContent = used ? grams(used) : "";
+    if (used && planned && Math.abs(used - planned) > 0.5) {
+      tr.children[4].title = "Soll " + grams(planned);
+    }
+    if (run.weight_source === "estimate" || (run.weight_source === "measured" && false)) {
+      tr.children[4].textContent += run.weight_source === "estimate" ? " ≈" : "";
+    }
     const cost = Number(run.filament_cost || 0) + Number(run.energy_cost || 0);
     tr.children[5].textContent = cost ? euro(cost) : "";
     const verdict = document.createElement("select");

web/templates/statistik.html

@@ -0,0 +1,214 @@
+{% extends "layout.html" %}
+{% block body %}
+<div class="page-head">
+  <div>
+    <h1>Statistik</h1>
+    <p class="tiny">Auslastung, Verbrauch und Erfolgsquote aus dem Protokoll.</p>
+  </div>
+  <div class="page-head-side">
+    <a class="ghost" id="csv-link" href="/api/v1/statistik.csv">CSV</a>
+  </div>
+</div>
+<div class="page-tools">
+  <div class="segmented period-presets" id="period" role="group" aria-label="Zeitraum">
+    <button type="button" data-period="all" class="on">Alles</button>
+    <button type="button" data-period="day">Tag</button>
+    <button type="button" data-period="week">Woche</button>
+    <button type="button" data-period="month">Monat</button>
+    <button type="button" data-period="yesterday">Gestern</button>
+    <button type="button" data-period="last_week">Letzte Woche</button>
+    <button type="button" data-period="last_month">Letzter Monat</button>
+  </div>
+  <input type="date" id="since" title="Von" class="date-field">
+  <input type="date" id="until" title="Bis" class="date-field">
+  <select id="host"><option value="">Alle Drucker</option></select>
+  <input type="text" id="material" placeholder="Sorte" size="10">
+  <input type="text" id="brand" placeholder="Marke" size="10">
+  <button type="button" id="reload">Aktualisieren</button>
+</div>
+<p id="stat-note"></p>
+<div id="stat" class="statistik"></div>
+{% endblock %}
+{% block script %}
+<script>
+function kpi(label, value, hint) {
+  return `<div class="kpi"><div class="kpi-val">${value}</div><div class="kpi-label">${escapeHtml(label)}</div>${hint ? '<div class="tiny">' + escapeHtml(hint) + "</div>" : ""}</div>`;
+}
+
+function isoDate(date) {
+  const y = date.getFullYear();
+  const m = String(date.getMonth() + 1).padStart(2, "0");
+  const d = String(date.getDate()).padStart(2, "0");
+  return y + "-" + m + "-" + d;
+}
+
+function startOfWeek(date) {
+  const day = date.getDay();
+  const mondayOffset = day === 0 ? -6 : 1 - day;
+  const start = new Date(date.getFullYear(), date.getMonth(), date.getDate() + mondayOffset);
+  return start;
+}
+
+function periodRange(key) {
+  const today = new Date();
+  today.setHours(0, 0, 0, 0);
+  if (key === "all") return { since: "", until: "" };
+  if (key === "day") return { since: isoDate(today), until: isoDate(today) };
+  if (key === "yesterday") {
+    const day = new Date(today);
+    day.setDate(day.getDate() - 1);
+    return { since: isoDate(day), until: isoDate(day) };
+  }
+  if (key === "week") {
+    const start = startOfWeek(today);
+    const end = new Date(start);
+    end.setDate(end.getDate() + 6);
+    return { since: isoDate(start), until: isoDate(end) };
+  }
+  if (key === "last_week") {
+    const start = startOfWeek(today);
+    start.setDate(start.getDate() - 7);
+    const end = new Date(start);
+    end.setDate(end.getDate() + 6);
+    return { since: isoDate(start), until: isoDate(end) };
+  }
+  if (key === "month") {
+    const start = new Date(today.getFullYear(), today.getMonth(), 1);
+    const end = new Date(today.getFullYear(), today.getMonth() + 1, 0);
+    return { since: isoDate(start), until: isoDate(end) };
+  }
+  if (key === "last_month") {
+    const start = new Date(today.getFullYear(), today.getMonth() - 1, 1);
+    const end = new Date(today.getFullYear(), today.getMonth(), 0);
+    return { since: isoDate(start), until: isoDate(end) };
+  }
+  return { since: "", until: "" };
+}
+
+function setPeriodActive(key) {
+  document.querySelectorAll("#period [data-period]").forEach((btn) => {
+    btn.classList.toggle("on", btn.dataset.period === key);
+  });
+}
+
+function clearPeriodActive() {
+  document.querySelectorAll("#period [data-period]").forEach((btn) => btn.classList.remove("on"));
+}
+
+function fillPrinters(rows) {
+  const select = document.getElementById("host");
+  const current = select.value;
+  const known = new Set([...select.options].map((o) => o.value));
+  (rows || []).forEach((row) => {
+    if (!row.printer_host || known.has(row.printer_host)) return;
+    const opt = document.createElement("option");
+    opt.value = row.printer_host;
+    opt.textContent = row.printer_name || row.printer_host;
+    select.appendChild(opt);
+    known.add(row.printer_host);
+  });
+  if ([...select.options].some((o) => o.value === current)) select.value = current;
+}
+
+function render(data) {
+  fillPrinters(data.by_printer);
+  const o = data.overview || {};
+  const jobs = o.jobs || 0;
+  const success = jobs ? Math.round(100 * (o.completed || 0) / jobs) : 0;
+  const scrap = jobs ? Math.round(100 * (o.scrap || 0) / jobs) : 0;
+  const ratio = data.estimate_ratio != null
+    ? (data.estimate_ratio * 100).toFixed(0) + " %"
+    : "—";
+
+  const printers = (data.by_printer || []).map((p) => `
+    <tr>
+      <td>${escapeHtml(p.printer_name || p.printer_host)}</td>
+      <td class="num">${p.jobs}</td>
+      <td class="num">${hours(p.duration_s)}</td>
+      <td class="num">${grams(p.weight_g)}</td>
+      <td class="num">${euro(p.cost)}</td>
+      <td class="num">${p.completed}</td>
+    </tr>`).join("") || '<tr><td class="empty" colspan="6">Keine Daten.</td></tr>';
+
+  const materials = (data.by_material || []).map((m) => `
+    <tr>
+      <td>${escapeHtml(m.material_type || "—")}</td>
+      <td>${escapeHtml(m.brand || "")}</td>
+      <td class="num">${grams(m.weight_g)}</td>
+      <td class="num">${euro(m.cost)}</td>
+      <td class="num">${m.jobs}</td>
+    </tr>`).join("") || '<tr><td class="empty" colspan="5">Kein Spulenabzug im Zeitraum.</td></tr>';
+
+  document.getElementById("stat").innerHTML = `
+    <div class="kpi-row">
+      ${kpi("Läufe", String(jobs))}
+      ${kpi("Druckzeit", hours(o.duration_s))}
+      ${kpi("Verbrauch", grams(o.weight_g))}
+      ${kpi("Kosten", euro(o.cost))}
+      ${kpi("Erfolg", success + " %", (o.completed || 0) + " fertig · " + (o.failed || 0) + " abgebrochen")}
+      ${kpi("Ausschuss", scrap + " %", (o.scrap || 0) + " mit Urteil Ausschuss")}
+      ${kpi("Schätztreue", ratio, data.estimate_count ? data.estimate_count + " Läufe mit Soll-Zeit" : "keine Soll-Zeit")}
+    </div>
+    <div class="card">
+      <h2>Nach Drucker</h2>
+      <div class="table-wrap"><table>
+        <thead><tr><th>Drucker</th><th>Läufe</th><th>Zeit</th><th>Gramm</th><th>Kosten</th><th>Fertig</th></tr></thead>
+        <tbody>${printers}</tbody>
+      </table></div>
+    </div>
+    <div class="card">
+      <h2>Nach Material</h2>
+      <div class="table-wrap"><table>
+        <thead><tr><th>Sorte</th><th>Marke</th><th>Gramm</th><th>Kosten</th><th>Läufe</th></tr></thead>
+        <tbody>${materials}</tbody>
+      </table></div>
+    </div>`;
+}
+
+async function load() {
+  const params = new URLSearchParams();
+  const since = document.getElementById("since").value;
+  const until = document.getElementById("until").value;
+  const host = document.getElementById("host").value;
+  const material = document.getElementById("material").value.trim();
+  const brand = document.getElementById("brand").value.trim();
+  if (since) params.set("since", since);
+  if (until) params.set("until", until);
+  if (host) params.set("host", host);
+  if (material) params.set("material", material);
+  if (brand) params.set("brand", brand);
+  const q = params.toString();
+  document.getElementById("csv-link").href = "/api/v1/statistik.csv" + (q ? "?" + q : "");
+  const data = await api("/statistik" + (q ? "?" + q : ""));
+  render(data);
+}
+
+function applyPeriod(key) {
+  const range = periodRange(key);
+  document.getElementById("since").value = range.since;
+  document.getElementById("until").value = range.until;
+  setPeriodActive(key);
+  load().catch((error) => showNote("stat-note", error));
+}
+
+document.getElementById("period").addEventListener("click", (event) => {
+  const button = event.target.closest("[data-period]");
+  if (!button) return;
+  applyPeriod(button.dataset.period);
+});
+
+document.getElementById("reload").addEventListener("click", () => {
+  load().catch((error) => showNote("stat-note", error));
+});
+["since", "until"].forEach((id) => {
+  document.getElementById(id).addEventListener("change", () => {
+    clearPeriodActive();
+    load().catch((error) => showNote("stat-note", error));
+  });
+});
+document.getElementById("host").addEventListener("change", () => {
+  load().catch((error) => showNote("stat-note", error));
+});
+load().catch((error) => showNote("stat-note", error));
+</script>
+{% endblock %}

web/templates/wand.html

@@ -86,7 +86,7 @@
 {% endblock %}
 {% block script %}
 <script src="{{ url_for('static', filename='three.min.js') }}?v=1"></script>
-<script src="{{ url_for('static', filename='gcode-viewer.js') }}?v=8"></script>
+<script src="{{ url_for('static', filename='gcode-viewer.js') }}?v=10"></script>
 <script>
 const labels = STATE_LABELS;
 const rank = { printing: 0, paused: 1, error: 2, heating: 3, complete: 4, cancelled: 5, standby: 6, offline: 7 };
@@ -98,9 +98,19 @@ let wallSpools = [];
 let deskViewer = null;
 let deskCamFails = 0;
 let deskViewerFileId = null;
+let deskSyncGen = 0;
 let deskExcludeSelected = "";
 const wallPullTried = new Set();
 const toolpathCache = new Map();
+
+/** Kurzes leeres filename vom Drucker nicht übernehmen — sonst springt der Name alle paar Sekunden. */
+function stickyFilename(printer, previous) {
+  const next = (printer && printer.filename) || "";
+  if (next) return next;
+  const state = shownState(printer || {});
+  if (previous && ["printing", "paused", "heating", "complete"].includes(state)) return previous;
+  return "";
+}
 const cardNodes = new Map();
 const runningJobs = new Map();
 const printerCache = new Map();
@@ -208,6 +218,14 @@ function setHtml(el, html) {
   }
 }
 
+function setText(el, text) {
+  if (!el) return;
+  const next = text == null ? "" : String(text);
+  if (el._text === next) return;
+  el._text = next;
+  el.textContent = next;
+}
+
 function tempbarHtml(label, value, target, scale, iconName) {
   if (value == null) return "";
   const now = Math.round(value);
@@ -265,12 +283,19 @@ function swatchesHtml(printer) {
   }).join("");
 }
 
-function actionsHtml(state) {
+function etikettHtml(printer) {
+  const runId = printer && printer.live_run_id;
+  if (!runId) return "";
+  return `<a class="ghost" href="/etikett/lauf/${runId}?mode=druck" target="_blank" rel="noopener">Etikett</a>`;
+}
+
+function actionsHtml(state, printer) {
+  const label = (state === "printing" || state === "paused") ? etikettHtml(printer) : "";
   if (state === "printing") {
-    return `<button type="button" class="ghost" data-cmd="pause">${icon("pause")}Pause</button><button type="button" class="warn" data-cmd="abbrechen">${icon("stop")}Abbrechen</button>`;
+    return `${label}<button type="button" class="ghost" data-cmd="pause">${icon("pause")}Pause</button><button type="button" class="warn" data-cmd="abbrechen">${icon("stop")}Abbrechen</button>`;
   }
   if (state === "paused") {
-    return `<button type="button" data-cmd="fortsetzen">${icon("play")}Weiter</button><button type="button" class="warn" data-cmd="abbrechen">${icon("stop")}Abbrechen</button>`;
+    return `${label}<button type="button" data-cmd="fortsetzen">${icon("play")}Weiter</button><button type="button" class="warn" data-cmd="abbrechen">${icon("stop")}Abbrechen</button>`;
   }
   return "";
 }
@@ -327,13 +352,107 @@ function stripsHtml(printer, state) {
   return bits.join("");
 }
 
+function dryerLabel(status) {
+  if (status === "drying") return "trocknet";
+  if (status === "heater_err") return "Fehler";
+  return "aus";
+}
+
+function dryerDefaultTemp(dryer) {
+  if (dryer.target > 0) return dryer.target;
+  if (dryer.temp > 0) return dryer.temp;
+  return 45;
+}
+
+function aceSteerKey(printer) {
+  const dryers = printer.dryers || [];
+  const dryerPart = dryers.map((d) => String(d.id)).join(",");
+  const slots = wallSpools
+    .filter((s) => s.printer_host === printer.host && s.ace_slot)
+    .map((s) => Number(s.ace_slot))
+    .sort((a, b) => a - b)
+    .join(",");
+  return dryerPart + "|" + slots;
+}
+
+function spoolHex(spool) {
+  const colors = spool && spool.colors;
+  if (Array.isArray(colors)) {
+    for (const item of colors) {
+      if (item && item.hex) return item.hex;
+      if (typeof item === "string" && item.trim()) return item.trim();
+    }
+  }
+  const label = spool && spool.color;
+  if (typeof label === "string" && /^#?[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$/.test(label.trim())) {
+    return label.trim().startsWith("#") ? label.trim() : "#" + label.trim();
+  }
+  return "";
+}
+
+function aceSlotLabel(slot) {
+  const n = Number(slot);
+  if (n <= 4) return "ACE 1 · " + n;
+  return "ACE 2 · " + (n - 4);
+}
+
+function aceSteerHtml(printer) {
+  const dryers = printer.dryers || [];
+  if (!dryers.length) return "";
+  const bits = [];
+  dryers.forEach((dryer) => {
+    const id = Number(dryer.id);
+    const label = "ACE " + (id + 1);
+    const status = dryerLabel(dryer.status);
+    const temp = dryer.temp || 0;
+    const target = dryer.target || 0;
+    const remain = dryer.remain || 0;
+    const dur = remain > 0 ? remain : 240;
+    const hot = dryerDefaultTemp(dryer);
+    const info = [
+      status,
+      temp || target ? temp + "°" + (target ? " / " + target + "°" : "") : "",
+      remain > 0 ? "noch " + remain + " min" : "",
+    ].filter(Boolean).join(" · ");
+    bits.push(`<div class="steer-ace" data-dryer-id="${id}">
+      <div class="steer-ace-head"><b>${escapeHtml(label)} Trockner</b><span class="tiny" data-dryer-info>${escapeHtml(info)}</span></div>
+      <div class="steer-row">
+        <label>Temp °C <input type="number" data-steer="dryer-temp-${id}" min="35" max="65" value="${escapeHtml(String(hot))}"></label>
+        <label>Dauer min <input type="number" data-steer="dryer-dur-${id}" min="1" max="720" value="${escapeHtml(String(dur))}"></label>
+        <button type="button" data-steer-go="dryer_start" data-dryer-id="${id}">Start</button>
+        <button type="button" class="ghost" data-steer-go="dryer_stop" data-dryer-id="${id}">Stopp</button>
+      </div>
+    </div>`);
+  });
+  const loaded = wallSpools
+    .filter((s) => s.printer_host === printer.host && s.ace_slot)
+    .slice()
+    .sort((a, b) => Number(a.ace_slot) - Number(b.ace_slot));
+  if (loaded.length) {
+    bits.push(`<div class="steer-ace-slots"><div class="steer-ace-head"><b>Plätze</b><span class="tiny">Sorte und Farbe aus Grotti</span></div>`);
+    loaded.forEach((spool) => {
+      const slot = Number(spool.ace_slot);
+      const hex = spoolHex(spool) || "#555";
+      const kind = spool.material_type || "—";
+      bits.push(`<div class="steer-slot-row">
+        <span class="dot" style="background:${escapeHtml(hex)}"></span>
+        <span class="grow"><b>${escapeHtml(aceSlotLabel(slot))}</b> · ${escapeHtml(kind)} · ${escapeHtml(spool.name || "")}</span>
+        <button type="button" class="ghost" data-steer-go="slot_setzen" data-ace-slot="${slot}">an den Drucker</button>
+      </div>`);
+    });
+    bits.push(`</div>`);
+  }
+  return bits.join("");
+}
+
 function steerPanelHtml(printer) {
   const n = printer.nozzle_target != null ? Math.round(printer.nozzle_target) : "";
   const b = printer.bed_target != null ? Math.round(printer.bed_target) : "";
   const sp = typeof printer.speed_factor === "number" ? Math.round(printer.speed_factor * 100) : 100;
   const flow = typeof printer.extrude_factor === "number" ? Math.round(printer.extrude_factor * 100) : 100;
   const fan = typeof printer.fan === "number" ? Math.round(printer.fan * 100) : 0;
-  return `<div class="steer" data-steer-host="${escapeHtml(printer.host)}">
+  const aceKey = aceSteerKey(printer);
+  return `<div class="steer" data-steer-host="${escapeHtml(printer.host)}" data-ace-key="${escapeHtml(aceKey)}">
     <div class="steer-row">
       <label>${icon("nozzle")} Düse <input type="number" data-steer="nozzle" data-steer-action="nozzle" min="0" max="350" value="${escapeHtml(String(n))}"></label>
       <label>${icon("bed")} Bett <input type="number" data-steer="bed" data-steer-action="bed" min="0" max="150" value="${escapeHtml(String(b))}"></label>
@@ -345,6 +464,7 @@ function steerPanelHtml(printer) {
       <label>Flow % <input type="number" data-steer="flow" data-steer-action="flow" min="50" max="150" value="${escapeHtml(String(flow))}"></label>
       <label>${icon("fan")} Fan % <input type="number" data-steer="fan" data-steer-action="fan" min="0" max="100" value="${escapeHtml(String(fan))}"></label>
     </div>
+    ${aceSteerHtml(printer)}
     <p class="tiny">Enter im Feld setzt nur diesen Wert.</p>
   </div>`;
 }
@@ -447,8 +567,9 @@ function anycubicTaskLine(printer) {
   return "<span>Anycubic <b>" + escapeHtml(bits.join(" · ")) + "</b></span>";
 }
 
-function jobLineVisible(printer, state) {
+function jobLineVisible(printer, state, filename) {
-  return !!printer.filename && state !== "standby" && state !== "offline";
+  const name = filename != null ? filename : (printer && printer.filename);
+  return !!name && state !== "standby" && state !== "offline";
 }
 
 function shortName(name) {
@@ -490,7 +611,14 @@ function buildCard(printer) {
         <div data-role="bar"></div>
         <div class="stats" data-role="stats"></div>
         <div data-role="temps"></div>
-        <div class="job-line" data-role="jobline">${icon("cube")}<span class="name" data-role="job"></span><span class="swatches" data-role="swatches"></span></div>
+        <div class="job-line" data-role="jobline">
+          <img class="job-thumb" data-role="thumb" alt="" hidden>
+          <span class="job-ico" data-role="jobico">${icon("cube")}</span>
+          <div class="job-meta">
+            <span class="name" data-role="job"></span>
+            <span class="swatches" data-role="swatches"></span>
+          </div>
+        </div>
         <div data-role="flow"></div>
         <div data-role="strips"></div>
         <div class="card-actions" data-role="controls"></div>
@@ -510,11 +638,13 @@ function patchSteerValues(root, printer) {
   if (steerHasFocus(root)) return;
   const steer = root.querySelector("[data-role=steer]");
   if (!steer) return;
-  const nozzle = steer.querySelector('[data-steer="nozzle"]');
+  const panel = steer.querySelector(".steer");
-  const bed = steer.querySelector('[data-steer="bed"]');
+  if (!panel) return;
-  const speed = steer.querySelector('[data-steer="speed"]');
+  const nozzle = panel.querySelector('[data-steer="nozzle"]');
-  const flow = steer.querySelector('[data-steer="flow"]');
+  const bed = panel.querySelector('[data-steer="bed"]');
-  const fan = steer.querySelector('[data-steer="fan"]');
+  const speed = panel.querySelector('[data-steer="speed"]');
+  const flow = panel.querySelector('[data-steer="flow"]');
+  const fan = panel.querySelector('[data-steer="fan"]');
   if (nozzle && document.activeElement !== nozzle) {
     nozzle.value = printer.nozzle_target != null ? Math.round(printer.nozzle_target) : "";
   }
@@ -530,13 +660,39 @@ function patchSteerValues(root, printer) {
   if (fan && document.activeElement !== fan && typeof printer.fan === "number") {
     fan.value = Math.round(printer.fan * 100);
   }
+  (printer.dryers || []).forEach((dryer) => {
+    const id = Number(dryer.id);
+    const box = panel.querySelector(`[data-dryer-id="${id}"]`);
+    if (!box) return;
+    const info = box.querySelector("[data-dryer-info]");
+    if (info) {
+      const status = dryerLabel(dryer.status);
+      const temp = dryer.temp || 0;
+      const target = dryer.target || 0;
+      const remain = dryer.remain || 0;
+      info.textContent = [
+        status,
+        temp || target ? temp + "°" + (target ? " / " + target + "°" : "") : "",
+        remain > 0 ? "noch " + remain + " min" : "",
+      ].filter(Boolean).join(" · ");
+    }
+    const tempInput = box.querySelector(`[data-steer="dryer-temp-${id}"]`);
+    const durInput = box.querySelector(`[data-steer="dryer-dur-${id}"]`);
+    if (tempInput && document.activeElement !== tempInput && dryer.status === "drying" && dryer.target > 0) {
+      tempInput.value = dryer.target;
+    }
+    if (durInput && document.activeElement !== durInput && dryer.remain > 0) {
+      durInput.value = dryer.remain;
+    }
+  });
 }
 
 function patchCard(article, printer) {
   const state = shownState(printer);
   const clearNow = needsClear(printer);
+  const shownFile = stickyFilename(printer, article.dataset.filename || "");
   article.dataset.state = state;
-  article.dataset.filename = printer.filename || "";
+  article.dataset.filename = shownFile;
   article.dataset.progress = String(printer.progress || 0);
   article.dataset.family = printer.family || "";
   article.dataset.needsClear = clearNow ? "1" : "";
@@ -551,16 +707,45 @@ function patchCard(article, printer) {
   setHtml(role("stats"), statsHtml(printer, state));
   setHtml(role("temps"), tempbarsHtml(printer, state));
   const jobline = role("jobline");
-  if (jobline) jobline.hidden = !jobLineVisible(printer, state);
+  const jobVisible = jobLineVisible(printer, state, shownFile);
+  const hasThumb = !!(jobVisible && printer.preview);
+  if (jobline) {
+    jobline.hidden = !jobVisible;
+    jobline.classList.toggle("has-thumb", hasThumb);
+  }
+  const thumb = role("thumb");
+  const jobico = role("jobico");
+  if (thumb) {
+    if (hasThumb) {
+      const next = withToken(printer.preview);
+      if (thumb.dataset.srcKey !== next) {
+        thumb.dataset.srcKey = next;
+        thumb.src = next;
+      }
+      thumb.hidden = false;
+      thumb.onerror = () => {
+        thumb.hidden = true;
+        thumb.dataset.srcKey = "";
+        if (jobline) jobline.classList.remove("has-thumb");
+        if (jobico) jobico.hidden = false;
+      };
+      if (jobico) jobico.hidden = true;
+    } else {
+      thumb.hidden = true;
+      thumb.removeAttribute("src");
+      thumb.dataset.srcKey = "";
+      if (jobico) jobico.hidden = false;
+    }
+  }
   const job = role("job");
   if (job) {
-    job.textContent = jobName(printer.filename) || "";
+    setText(job, jobName(shownFile) || "");
-    job.title = printer.filename || "";
+    job.title = shownFile || "";
   }
   setHtml(role("swatches"), swatchesHtml(printer));
   setHtml(role("flow"), flowHtml(printer));
   setHtml(role("strips"), stripsHtml(printer, state));
-  setHtml(role("controls"), actionsHtml(state));
+  setHtml(role("controls"), actionsHtml(state, printer));
 }
 
 function refreshDeskCamera(printer) {
@@ -651,9 +836,10 @@ function patchDesk(printer) {
   if (!printer || printer.host !== deskHost) return;
   const state = shownState(printer);
   const prevFile = deskEl.dataset.filename || "";
-  const fileChanged = prevFile !== (printer.filename || "");
+  const shownFile = stickyFilename(printer, prevFile);
+  const fileChanged = prevFile !== shownFile;
   deskEl.dataset.host = printer.host;
-  deskEl.dataset.filename = printer.filename || "";
+  deskEl.dataset.filename = shownFile;
   deskEl.dataset.progress = String(printer.progress || 0);
   deskEl.classList.remove(...DESK_STATES);
   deskEl.classList.add(state);
@@ -676,11 +862,12 @@ function patchDesk(printer) {
   setHtml(role("temps"), tempbarsHtml(printer, state));
 
   const jobline = role("jobline");
-  if (jobline) jobline.hidden = !jobLineVisible(printer, state) && !printer.preview;
+  const jobVisible = jobLineVisible(printer, state, shownFile);
+  if (jobline) jobline.hidden = !jobVisible && !printer.preview;
   const job = role("job");
   if (job) {
-    job.textContent = jobName(printer.filename) || (jobLineVisible(printer, state) ? "" : "Kein Auftrag");
+    setText(job, jobName(shownFile) || (jobVisible ? "" : "Kein Auftrag"));
-    job.title = printer.filename || "";
+    job.title = shownFile || "";
   }
   const preview = role("preview");
   if (preview) {
@@ -696,7 +883,7 @@ function patchDesk(printer) {
   setHtml(role("facts"), factsHtml(printer));
   setHtml(role("flow"), flowHtml(printer));
   setHtml(role("strips"), stripsHtml(printer, state));
-  setHtml(role("controls"), actionsHtml(state));
+  setHtml(role("controls"), actionsHtml(state, printer));
   const estop = role("estop");
   if (estop) {
     const showStop = state === "printing" || state === "paused" || state === "heating";
@@ -709,10 +896,14 @@ function patchDesk(printer) {
   }
 
   const steer = role("steer");
-  if (steer && (!steer.querySelector(".steer") || fileChanged)) {
+  if (steer) {
-    setHtml(steer, steerPanelHtml(printer));
+    const panel = steer.querySelector(".steer");
-  } else {
+    const nextKey = aceSteerKey(printer);
-    patchSteerValues(deskEl, printer);
+    if (!panel || fileChanged || panel.dataset.aceKey !== nextKey) {
+      setHtml(steer, steerPanelHtml(printer));
+    } else {
+      patchSteerValues(deskEl, printer);
+    }
   }
   setHtml(role("mesh"), heatMapHtml(printer));
 
@@ -725,8 +916,9 @@ async function syncDeskViewer(printer) {
   const canvas = deskEl.querySelector('[data-role="path-canvas"]');
   const caption = deskEl.querySelector('[data-role="path-caption"]');
   if (!canvas || !window.GrottiGcodeViewer || !window.THREE) return;
-  const filename = printer.filename || "";
+  const filename = stickyFilename(printer, deskEl.dataset.filename || "");
   const progress = Number(printer.progress || 0);
+  const gen = ++deskSyncGen;
   if (!deskViewer) {
     deskViewer = GrottiGcodeViewer.create(canvas);
     deskViewer.setExcludeObjects({ objects: [], excluded: [], current: null }, {
@@ -741,45 +933,55 @@ async function syncDeskViewer(printer) {
   let file = matchLibraryFile(filename);
   if (!file && filename && !wallPullTried.has(deskHost + "|" + filename)) {
     wallPullTried.add(deskHost + "|" + filename);
-    if (caption) caption.textContent = "lade vom Drucker …";
+    setText(caption, "lade vom Drucker …");
     try {
       const saved = await api("/dateien/von-drucker", {
         method: "POST",
         json: { host: deskHost, filename },
       });
+      if (gen !== deskSyncGen) return;
       libraryFiles = await api("/dateien");
+      if (gen !== deskSyncGen) return;
       file = saved || matchLibraryFile(filename);
     } catch (error) {
       /* bleibt leer */
     }
   }
   if (!file) {
+    // Kurz leerer filename: Pfad und Caption nicht verwerfen (sonst Flackern alle 5 s).
+    if (!filename && deskViewerFileId) return;
     deskViewer.setPath({ points: [] });
     deskViewerFileId = null;
-    if (caption) caption.textContent = filename ? "Datei nicht in Grotti" : "kein Auftrag";
+    setText(caption, filename ? "Datei nicht in Grotti" : "kein Auftrag");
     renderExcludePanel(printer);
     return;
   }
   try {
     let data = toolpathCache.get(file.id);
-    const needLoad = !data || data.version !== 5 || deskViewerFileId !== file.id;
+    const cachedOk = data && Number(data.version) === 8;
-    if (needLoad) {
+    const needFetch = !cachedOk;
-      if (caption) caption.textContent = "wird gelesen …";
+    const needSetPath = deskViewerFileId !== file.id;
-      data = await api("/dateien/" + file.id + "/pfad");
+    if (needFetch) {
+      if (needSetPath) setText(caption, "wird gelesen …");
+      data = await api("/dateien/" + file.id + "/pfad?tp=8");
+      if (gen !== deskSyncGen) return;
       toolpathCache.set(file.id, data);
-      const sameFile = deskViewerFileId === file.id;
+    }
-      deskViewer.setPath(data, { keepView: sameFile });
+    if (needFetch || needSetPath) {
+      deskViewer.setPath(data, { keepView: deskViewerFileId === file.id });
       deskViewerFileId = file.id;
     }
     if (!(data.points && data.points.length)) {
-      if (caption) caption.textContent = "leer in Datei";
+      setText(caption, "leer in Datei");
       return;
     }
   } catch (error) {
     // File-Id behalten — sonst setzt der nächste Poll die 3D-Ansicht zurück
-    if (caption) caption.textContent = error.message || "fehlgeschlagen";
+    if (gen !== deskSyncGen) return;
+    setText(caption, error.message || "fehlgeschlagen");
     return;
   }
+  if (gen !== deskSyncGen) return;
   deskViewer.setProgress(progress, {
     layer: printer.layer,
     layers: printer.layers,
@@ -800,7 +1002,7 @@ async function syncDeskViewer(printer) {
   const layerTxt = printer.layers
     ? " · Schicht " + (printer.layer || 0) + "/" + printer.layers
     : "";
-  if (caption) caption.textContent = file.name + " · " + Math.round(progress * 100) + " %" + layerTxt;
+  setText(caption, jobName(file.name) + " · " + Math.round(progress * 100) + " %" + layerTxt);
 }
 
 function renderExcludePanel(printer) {
@@ -1000,8 +1202,8 @@ async function refresh() {
   if (!libraryFiles.length) {
     try { libraryFiles = await api("/dateien"); } catch (error) { libraryFiles = []; }
   }
-  if (!wallSpools.length) {
+  if (!wallSpools.length || deskHost) {
-    try { wallSpools = await api("/spulen"); } catch (error) { wallSpools = []; }
+    try { wallSpools = await api("/spulen"); } catch (error) { /* behalten */ }
   }
   const all = await api("/drucker");
   const printers = sortPrinters(all.slice());
@@ -1223,11 +1425,35 @@ async function handleWallClick(event) {
           method: "POST", json: { action: "fan", percent: 0 },
         });
         toast("Heizung und Lüfter aus.");
+      } else if (go === "dryer_start") {
+        const id = Number(steerBtn.dataset.dryerId);
+        const temp = val("dryer-temp-" + id);
+        const duration = val("dryer-dur-" + id);
+        await api("/drucker/" + encodeURIComponent(host) + "/steuern", {
+          method: "POST",
+          json: { action: "dryer_start", id, temp, duration },
+        });
+        toast("Trockner gestartet.");
+      } else if (go === "dryer_stop") {
+        const id = Number(steerBtn.dataset.dryerId);
+        await api("/drucker/" + encodeURIComponent(host) + "/steuern", {
+          method: "POST",
+          json: { action: "dryer_stop", id },
+        });
+        toast("Trockner gestoppt.");
+      } else if (go === "slot_setzen") {
+        const aceSlot = Number(steerBtn.dataset.aceSlot);
+        await api("/drucker/" + encodeURIComponent(host) + "/steuern", {
+          method: "POST",
+          json: { action: "slot_setzen", ace_slot: aceSlot },
+        });
+        toast("Platz an den Drucker geschrieben.");
       }
       showNote("note", null);
       refresh();
     } catch (error) {
       showNote("note", error);
+      toast(error.message, "bad");
     } finally {
       steerBtn.disabled = false;
     }